| Member with 143 posts. THREAD STARTER | | Join Date: Nov 2009 Experience: Beginner |
24-Jul-2011, 05:49 AM
#25 |
Okay, here i am again.
let me tell you what happened.
installing XP took me quite long, because i had to work alot, but that all went just fine.
now, after the installation, it started just fine.
after installing drivers, it started just fine.
after enabling my USB hub, and downloading drivers for that, it started just fine.
but then it froze up, while installing my LAN-card (integrated) drivers.
now, the connection between those two reminded me of something suspicious i saw.
one of my USB hubs, had the same IRQ as my LAN card.
after disabling the USB hub, it started just fine.
i havent used the USB hub yet, so we'll have to see about that.
but this is probably what's been screwing stuff up.
also, the 4 remaining USB hubs altogether only used 2 IRQ's
is this normal for usb controllers? or is this causing my USB problems?
last but not least.
my Device Manager shows that my SM bus controller is not updated properly, windows couldnt do it itself.
so after some googling i found out that it was my chipset driver.
now, how do i install chipset drivers?
just like, for example, a graphics driver, or is there more to it?
its the AMD 690G + SB 600 Chipset
Last edited by Screamer216; 24-Jul-2011 at 05:51 AM..
Reason: added chipset specs
|