[maxman]

My HP PhotoSmart 7350 printer was working just fine. For no apparent reason it stopped working. The main problem seems to be it is not powering up. I did all the on/off reboot scenarios, different power source etc. I even checked the A/C power adapter using a volt/amp meter and the meter showed the 32V. (so the adapter does not seem to be the problem). Could there be a simple solution to this - perhaps a fuse or reset button? Thanks for any help you might suggest. Novice

[highway61]

Try of change electrical wall-socket for the power.
Connect directly in the wall

Probably problem in the plug-insert socket in the back of the printer.
A welding can be loose. Test if the socket is tight in the printer case.


With a few money is possible that you can repair the printer!

[Lurker1]

Hi maxman

You might try a hard reset.

http://h10025.www1.hp.com/ewfrf/wc/d...dlc=en&lang=en

Instructions here

http://h10025.www1.hp.com/ewfrf/wc/d...dlc=en&lang=en

Is the printer still under warranty?

[torabian02]

My data USB port needs to be replaced but I cannot seem to figure out how to get the cover off without potentially breaking it. Can anyone point me at a guide to remove this confounded casing?