[Alex Ethridge]

The board is Intel D845EPT2 with Intel 845 SE chipset. I found an English manual at the Intel site; but, it has nothing in it about the front panel LEDs, power switch, reset, etc. in all of its 80 (+/-) pages. I guess this board was originally intended to be used in a case that had a front-panel wiring block.

I did a Google search and came up with a plethora of irrelevant information.

I guess there might be a standard arrangement that Intel uses; but, I can't find anything indicating that either.

Thanks in advance.

[cwwozniak]

Found this on the Intel web site (second page listed for a Google search of D845EPT2 connectors).

[win2kpro]

All standard Intel boards from series 845 onward use the standard Intel front panel pinout cwwozniak posted.

[Alex Ethridge]

Thanks a lot, guys. I guess the right search terms just don't occur to me. I did a search for Intel D845EPT2 "front panel" pinout and came up with a manual 78 pages long that seemed to just skip over the front panel pinouts. And there were a lot of other "hits" that missed.

Thanks again.

[win2kpro]

On that board Intel didn't put the pinout in the manual, they put it in the technical specifications page 72.

ftp://download.intel.com/support/mot...2/A8491301.pdf