Advertisement

There's no such thing as a stupid question, but they're the easiest to answer.
Login
Search

Advertisement

Hardware Hardware
Search Search
Search for:
Tech Support Guy > > >

AMD Data Change - Update New Data to DMI


(!)

Norfolk's Avatar
Norfolk Norfolk is offline
Junior Member with 5 posts.
THREAD STARTER
 
Join Date: Apr 2009
13-Apr-2009, 10:23 AM #1
AMD Data Change - Update New Data to DMI
Hello
I get this message on every boot, befor OS loading: "AMD Data Change - Update New Data to DMI"
I flashed my MB withe the lastest bios; even old bioses but it keep showing.
I reset cmos, change battery disconect all unecessary hardwars without success.
What is updating and is there a solustion ?

Please help
leroys1000's Avatar
Account Disabled with 6,319 posts.
 
Join Date: Aug 2007
Location: Boise,Idaho
Experience: Intermediate
13-Apr-2009, 04:09 PM #2
Look in the BIOS for a setting called update ESCD
and disable it.
Norfolk's Avatar
Norfolk Norfolk is offline
Junior Member with 5 posts.
THREAD STARTER
 
Join Date: Apr 2009
14-Apr-2009, 05:07 AM #3
ThX leroys, it's allrady disabled
This is my config:
MB Abit A-S78H (AMD 780G chipset)
AMD Athlon X2 4800+
2 GO DDR2 Samsung
Hitachi Deskstar 500 GO

Last edited by Norfolk; 14-Apr-2009 at 06:11 AM..
crjdriver's Avatar
Computer Specs
Moderator with 31,487 posts.
 
Join Date: Jan 2001
Location: Reno, NV
14-Apr-2009, 07:57 AM #4
You get that msg because the bios has detected a hardware change. This can be cpu speed, ram speed, etc.

Does the system run OK after it boots?

Since that is an abit board, does it use the uguru thing and is that disabled?
Norfolk's Avatar
Norfolk Norfolk is offline
Junior Member with 5 posts.
THREAD STARTER
 
Join Date: Apr 2009
15-Apr-2009, 08:44 AM #5
Yes Crjdriver it boots and work fine, and No this board has not Uguru,
This message will drive me crazy.
look to this post the guy had the same prob with the same MB
http://forums.techguy.org/hardware/7...-changing.html

Hé; Mikefaraday are u here, how do you solved this prob ?
crjdriver's Avatar
Computer Specs
Moderator with 31,487 posts.
 
Join Date: Jan 2001
Location: Reno, NV
15-Apr-2009, 09:15 AM #6
I was doing some looking at the abit site. No manual to download so this is just a guess. Does the EQ function check temps, etc on bootup? If so, I would disable this in the bios.

I used to use abit boards a long time ago however they do have some flaky bios that do some strange things.
__________________
Microsoft MVP Desktop Experience
Norfolk's Avatar
Norfolk Norfolk is offline
Junior Member with 5 posts.
THREAD STARTER
 
Join Date: Apr 2009
15-Apr-2009, 10:28 AM #7
I took a round in bios and i have disabled Eqfan, Cool&quite... but no success;
look what Gigabyt Faq say :

Q:When switching on the PC there is always a message at BIOS POST "K8 NPT Data change... Update New Data to DMI", what does this message mean?

A:It means that data of the memory registry of K8 processor has been updated to DMI when the system is turned on. Those data are aimed to be written back to processor when PC wakes up from sleep mode of S3(STR).

In my case K8 npt is replaced by AMD.
I have Emailed ABIT many times but it seem that ABIT is down and there is no tech support.
crjdriver's Avatar
Computer Specs
Moderator with 31,487 posts.
 
Join Date: Jan 2001
Location: Reno, NV
15-Apr-2009, 11:28 AM #8
Abit used to build fine boards. I used many of their boards 10yrs ago. Since then, they have fallen on hard times in both the design and quality control of their products. You can hope this is addressed by a bios update in the future however I would NOT hold my breath waiting for them to fix the problem.
leroys1000's Avatar
Account Disabled with 6,319 posts.
 
Join Date: Aug 2007
Location: Boise,Idaho
Experience: Intermediate
15-Apr-2009, 02:58 PM #9
Might check into the different ACPI suspend states.
http://gsmblog.com/post/Difference-b...e-in-BIOS.aspx
Norfolk's Avatar
Norfolk Norfolk is offline
Junior Member with 5 posts.
THREAD STARTER
 
Join Date: Apr 2009
16-Apr-2009, 05:19 AM #10
Thx leroy,in my bios there is only 2 options: S3 and S1, in both of theme i still get this message. look here what i found on a gigabyt's FAQ :
Q:When switching on the PC there is always a message at BIOS POST "K8 NPT Data change... Update New Data to DMI", what does this message mean?

A:It means that data of the memory registry of K8 processor has been updated to DMI when the system is turned on. Those data are aimed to be written back to processor when PC wakes up from sleep mode of S3(STR).

http://www.gigabyte.com.tw/Support/M...ProductID=2579
Then i presum that this message is normal and it is in relation with power management of the CPU.
Crjdriver, ABit are shuttin down their MB division, then there is no hope on a new bios releas.
Thank u everybody and excuse my bad english.....
As Seen On

BBC, Reader's Digest, PC Magazine, Today Show, Money Magazine
WELCOME TO TECH SUPPORT GUY!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.


(clock)
THIS THREAD HAS EXPIRED.
Are you having the same problem? We have volunteers ready to answer your question, but first you'll have to join for free. Need help getting started? Check out our Welcome Guide.

Search Tech Support Guy

Find the solution to your
computer problem!




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


WELCOME
You Are Using: Server ID
Trusted Website Back to the Top ↑

Content Relevant URLs by vBSEO 3.3.2