[drdoo]

Hello,

I am new to this forum and a bit of a noob when it comes to temperature management. I have upgraded my computer with the E8500 dual-core and a DP45SG motherboard. Here are my specs:

My specs:
Case: Thermaltake w/ rear, side, and front fans
CPU: E8500 3.16 Ghz @ 333 Mghz x 9.5 VID 1.25
CPU Heatsink: Thermaltake Silent 775
Motherboard: DP45SG
RAM: Patriot Viper DDR3 1333 Mhz (2 x 2GB)
Video Card: Radeon HD4350
Audio Card: Audigy 4 Pro
OS: Windows XP/ Ubuntu Linux


I was wondering if my CPU temperatures are acceptable. Running RealTemp with a TJMax = 100, i get idle temperatures of 35c-39c, and 99.5% load temperatures of 60c-63c after running for 15-20 minutes... Is this ok? Shouldnt my temps be lower with a non-stock heatsink? (It's copper plated w/ fan etc...)

I would like to use this computer for non-gaming; mainly schoolwork, and Digital Audio Processing... My main question is; Will these temperatures rise if I use intensive audio programs such as ProTools, Fruity Loops, or Audacity (for linux)? Or are these less intensive on CPU?

Also, should I suspect that there may be a cooling issue?

Thanks for all your help!



Some Extra Info:

BIOS temperature readings:
- Processor Temp Idle : 36.5
- Internal Temp: 31.75
- Remote Temp: 30.75

[BG-0]

Run Prime95 for an hour or so, if the temps don't go over 70 or so, it's quite okay.

FWIW, that aftermarket cooler is AGE-OLD. Not really designed for Core 2 series. If you really want temps to be low, the legendary AC F7Pro would get you going. Or if you plan to OC someday, Sunbeam CCTF

[drdoo]

Thank you for your speedy reply!

When running Prime95 (blended) through RealTemp the heating up phase lasts only about 5 minutes... how can I get it to run for an hour?

Also, are there differences in operating systems in heating up processors? For example, will Windows Vista or 7 show an increase of processor intensity?


Thanks for you input and advice!


-drdoo

[BG-0]

Prime95 (small FFTs!) loads the CPU to 100%. Another program, I reckon of the very same level, if not a tad bit better, would be Orthos.
If the heat stabilizes after 5 minutes, then it does. Nothing, except dust and ambient heat will get it higher, maybe 5 hour load will add a degree or two, but that's pretty much your max temp.