[rculver9056]

I have an wxt-e830 external hard drive enclosure, which has both USB 2 and e-sata connectors, which I want to use with Windows Backup & Restore Center (Windows 7).
The USB 2 transfer is fine, albeit the slower USB2 transfer rate, but when I try the e-sata cable (on it's own!), data will be copied, but it will freeze the system for up to 30 seconds every minute or so.

The drive inside the enclsure is a seagate sata 300 drive, and the caddy supports this speed.

Anyone got any ideas on this?

By the way, my motherboard has 6 sata connectors, all of which are in use now, and the e-sata is connected via a back-plate with a cable (which came with the drive) directly onto the sata conector on the motherboard.

Thanks for any help

Richard

[rculver9056]

I think I have an idea about why this was happening.
I had the eSata plug on port 4 or 5 on the motherboard, which was set (due to a 'chipset limitation') to be raid-only.
Now on another and it's not happening any more. Not yet anyway!