Conversation Between lotuseclat79 and Numbat
IMPORTANT! READ THIS FIRST!This form is to write a personal message to another user. DO NOT ASK FOR TECH SUPPORT HERE. To ask your tech support question, please go to
the forums or read our
welcome guide for new members. Thanks for your cooperation!
Showing Visitor Messages 1 to 1 of 1
-
Seen a post of yours re dial up modems where you said you have set up your modem with the following:
I also have setup the wvdial.conf file in /etc as follows:
[Dialer Defaults]
Modem = /dev/ttyS0
Baud = 115200,N,8,1
SetVolume = 2
Dial Command = ATDT
Init0 = HUP
Init1 = ATZ
Init2 = AT&F1E0Q0V1&C1&D2S0=0
Init3 = ATS7=60S19=0M1&M4&K1&H1&R2&I0B0X4
Init4 = ATS10=255S11=40&U30&N39
Init5 = ATDT;
FlowControl = CRTSCTS
[Dialer phone1]
Dial Prefix = 1
Phone = <replace with 7-digit phone number>
Password = <replace with your password>
Username = <replace with your username>
Area Code = nnn
Inherits = Dialer Defaults
[Dialer phone2]
Dial Prefix = 1
Phone = <replace with alternative 7-digit phone number>
Password = <replace with your password>
Username = <replace with your username>
Area Code = nnn
Inherits = Dialer Defaults
...
Could you tell me how to do that?
Login 
Facebook 
Twitter 
TechGuy.tv 
TSG Mobile 
