Advertisement

There's no such thing as a stupid question, but they're the easiest to answer.
Login
Search

Advertisement

Search Search
Search for:
Tech Support Guy > > >

D-Link DIR-615 Router and Hughesnet HN9000 modem


(!)

jchrisa's Avatar
jchrisa jchrisa is offline
Computer Specs
Junior Member with 1 posts.
THREAD STARTER
 
Join Date: Nov 2011
Experience: Intermediate
27-Nov-2011, 01:23 AM #1
D-Link DIR-615 Router and Hughesnet HN9000 modem
We recently moved to a rural area where the only internet service we can get is dial-up or satellite internet service. We chose Hughesnet and got the HN9000 modem and we're having trouble connecting the D-link router to use for our other computers (it works fine when the modem is directly connected to my tablet via Ethernet cable). We've contacted hughestnet and they said the d-link will work with it but couldn't be more specific. Can you please tell me what to do to get the router to work with the modem.

Attached is the information collected from running IPCONFIG /ALL as well as
Thank you

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

Windows IP Configuration

Host Name . . . . . . . . . . . . : TecraM4
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 00-0E-7B-A2-A3-9B
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 67.142.167.10
67.142.167.11
Lease Obtained. . . . . . . . . . : Saturday, November 26, 2011 11:09:36 PM
Lease Expires . . . . . . . . . . : Sunday, November 27, 2011 12:09:36 AM

Ethernet adapter Bluetooth Personal Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Bluetooth Personal Area Network from TOSHIBA
Physical Address. . . . . . . . . : 00-03-7A-26-16-AA

TSG SysInfo:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) M processor 2.13GHz, x86 Family 6 Model 13 Stepping 8
Processor Count: 1
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce Go 6200 TE 64M / 6600 TE 128M, 128 Mb
Hard Drives: C: Total - 53842 MB, Free - 6636 MB;
Motherboard: TOSHIBA, Portable PC
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
etaf's Avatar
etaf   (Wayne) etaf is offline
Computer Specs
Moderator with 52,165 posts.
 
Join Date: Oct 2003
Location: Surrey, UK
27-Nov-2011, 06:04 AM #2
that ipconfig /all info is a router
and looking at this link http://www.hughes.com/ProductsAndTec...liteModem.aspx right at the bottom , the modem is in fact also a router
also confirmed in the user manual http://www.viasatelital.com/manuales...ion-HN9000.pdf

so to connect two routers together see below



------------------------------------------------------------------------

Connecting two (or more) SOHO broadband routers together

Connecting two (or more) SOHO broadband routers together
Shamelessly stolen from a John Will Post

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).

For reference, here's a link to a Typical example config using a Netgear router

------------------------------------------------------------------------
__________________
Wayne
Please let us know what the final solution was to any problem posted
As Seen On

BBC, Reader's Digest, PC Magazine, Today Show, Money Magazine
WELCOME TO TECH SUPPORT GUY!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.


(clock)
THIS THREAD HAS EXPIRED.
Are you having the same problem? We have volunteers ready to answer your question, but first you'll have to join for free. Need help getting started? Check out our Welcome Guide.

Search Tech Support Guy

Find the solution to your
computer problem!




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


WELCOME
You Are Using: Server ID
Trusted Website Back to the Top ↑