Advertisement

There's no such thing as a stupid question, but they're the easiest to answer.
Login
Search

Advertisement

Search Search
Search for:
Tech Support Guy > > >

Pages won't load and couple other problems.


(!)

Jaska's Avatar
Jaska Jaska is offline
Member with 2 posts.
THREAD STARTER
 
Join Date: Aug 2012
Experience: Beginner
04-Aug-2012, 08:20 PM #1
Pages won't load and couple other problems.
Pages won't load and and they stay white until it gives message saying something along lines "Could not connect to page...please check...ect".
Sometimes they load after restarting computer but if you close browser and try open it again they wont load most of the time.
Steam has also stopped working and freezes at part where its trying to connect to account. (Games section could possibly help whit this more but its kinda related)

Also "internet" symbol and bottom left corner says two different things at same time:

Network Internet Connection
Network No Internet Connection

Problem has gotten worse by day. First one restart would fix problem but now steam won't work and if you get pages to load after closing browser you need to restart computer couple of times before pages are loading again.

What could possibly cause this?

Operating system is 64bit Windows 7

Last edited by Jaska; 04-Aug-2012 at 08:54 PM..
etaf's Avatar
etaf   (Wayne) etaf is offline
Computer Specs
Moderator with 52,189 posts.
 
Join Date: Oct 2003
Location: Surrey, UK
05-Aug-2012, 03:38 AM #2
i would suspect a virus/malware problem

is this problem ALL the time - or intermittent

do a tcp/ip stack repair - see below

then do the following


------------------------------------------------------------------------

would you post the following tests when the internet is working OK, and then repeat ALL the tests when the internet disconnects.
Make sure you also indicate on the reply which tests are for what condition.

if you are connected by wireless, please include the xirrus screen shots for both conditions - see how below.

Please post back here the make and exact model of the router and if you have a separate modem, the make and exact model of the modem.

Please make a note of the status of the lights on the modem and on the router when working normally - post that light status here.
Now when the internet disconnects make a note of the status of the lights for the modem and router here again. also note which have changed.

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, Mcafee , AVG etc

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

Start> Run {search bar in Vista/W7}> type CMD to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

Type the following command
Ping {then a space and then add the number that is shown against the item labeled "default gateway" shown in the results from the ipconfig /all}
Post back the results in a reply here
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping google.com
Post back the results in a reply here
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Type the following command
Ping 209.183.226.152
Post back the results in a reply here
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste
Quote:
For your information only
these tests will check various stages of the connection, the first ping test, ping default gateway checks to see if you still have a connection to the router.
The next two Ping google.com & Ping 209.183.226.152 tests the connection to internet. google is to test by name and the ping test using a number is checking that a connection exists without DNS.
these tests then confirm if there is a dns issue on the connection.

------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install

If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

{If the above link does not work heres another link http://www.pcworld.com/downloads/fil.../download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need will need to haveNET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/cdn/pdf/Xirrus...-1-RevB-6.aspx

post a screen shot of the program running.
if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.

post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)

To post a screen shot of the active window.
1) hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
OR
2) if you are using Vista/Windows 7 you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool

To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
Full details are available here http://library.techguy.org/wiki/TSG_...g_a_Screenshot

Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better. "A desirable signal level for a robust Wi-Fi connection will be green".
note: the signal level is a negative number, so for example -88 is worst and -40 is better

If you are using the Mac OS then use http://www.istumbler.net/ or
if you want to optimise base station position and signal strength / dead spots use
http://www.chimoosoft.com/products/apgrapher/ which has a graph function to monitor signal
------------------------------------------------------------------------
------------------------------------------------------------------------

TCP/IP stack repair options for use with Vista/Windows 7

Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box
(A new dialogue box - black with white font, will appear on the screen ):

In the command prompt window that opens, type the following commands:

Note: Type only the text in bold and red for the following commands.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog and press enter

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log and press enter

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log and press enter

ReStart (reboot) the machine.

If you receive the message
The requested operation requires elevation.
Then please open the command prompt as administrator - as requested above
Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

Please note and post back - if you receive the following message :-
Access is Denied

please post back the results in a reply here - its important we know that these commands have worked correctly and not produced any errors
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Details also here
http://support.microsoft.com/kb/299357


------------------------------------------------------------------------
__________________
Wayne
Please let us know what the final solution was to any problem posted
As Seen On

BBC, Reader's Digest, PC Magazine, Today Show, Money Magazine
WELCOME TO TECH SUPPORT GUY!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.


Tags
pages won't load

(clock)
THIS THREAD HAS EXPIRED.
Are you having the same problem? We have volunteers ready to answer your question, but first you'll have to join for free. Need help getting started? Check out our Welcome Guide.

Search Tech Support Guy

Find the solution to your
computer problem!




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


WELCOME
You Are Using: Server ID
Trusted Website Back to the Top ↑