[Sparkmagea99]

Hi,

This problem sort of started out of no where with my computer where it will connect to my network for a second or two then immediately disconnect. Other computer and devices connect without a problem. I have also experienced this with every network I have tried to connect to; it does the same thing.

I figure it is therefore a problem with my laptop itself, but trouble shooting has yielded nothing and most of the fixes I have found require connecting to the network, but obviously I cannot do that.

I can connect with an Ethernet cable just fine. My guess would be that there is a setting that is incorrect within the wireless on my computer, but what that is I could not even venture to guess.

Any help is greatly appreciated.
Thanks

[Sparkmagea99]

Please note that I have seen the sticky at the top of this thread and followed the 2 workarounds that were talked about in the link. It did not work, I am at the same spot I was before.

[TerryNet]

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.