[Mlum]

I have a Linksys WRT54G wireless router and I can't get into my setup page. When I type the defaulted router address, I just get a bunch of wed sites. Please help.

[bearone2]

are you able to get into the internet direct from the modem?

[JohnWill]

Open a command prompt, Start, Run, CMD

In the command window, type: IPCONFIG

The gateway address is the address of your router, enter that into IE's address bar.

[Mlum]

The gateway address is what I typed in the address bar and it just gives me web sites....like I said in my post

[bearone2]

see #2

if you don't have basic internet from the modem, you won't be able to setup he router.

[Mlum]

I have cable service from Time Warner/Roadrunner and I used to be able to go to the router setup page before, in fact it was only a few weeks ago that I went to the setup page and I didn't change any settings. That's what is puzzling me, no changes was made so I should be able to go there but I can't.

[bearone2]

for the 3rd time, can you connect thru just the modem? maybe the router died.

[Mlum]

yes, I can connect with just the modem and I can ping the router with the router connected.

[bearone2]

try this.
http://www.linksysfix.com/check/HomePage/index.htm

[JohnWill]

With the computer connected to the router, please poste this:


For 98 or ME, Start, Run, COMMAND to open a DOS window:
--- or ---
For 2K or XP, Start, Run, CMD to open a DOS window:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.