[Screamer216]

ipconfig/all:
Ethernet-adapter Draadloze netwerkverbinding:

Status van medium . . . . . . . . : medium ontkoppeld
Beschrijving . . . . . . . . . . .:
Linksys Wireless-G PCI Adapter
Fysiek adres. . . . . . . . . . . : 00-14-BF-77-55-ED


ping to google.com (out):


Microsoft Windows XP [versie 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Jurgen>ping google.com
Ping-aanvraag kan host google.com niet vinden. Controleer de naam en probeer het

opnieuw.

ping to 209.191.93.53:

C:\Documents and Settings\Jurgen>ping 209.191.93.53

Pingen naar 209.191.93.53 met 32 byte gegevens:

Time-out bij opdracht.
Time-out bij opdracht.
Hardwarefout.
Hardwarefout.

Ping-statistieken voor 209.191.93.53:
Pakketten: verzonden = 4, ontvangen = 0, verloren = 4
(100% verlies).
C:\Documents and Settings\Jurgen>


havent checked lights on router yet

[etaf]

OK so the IPconfig has no IP address nor can it see the router ....

so we may be looking for a wireless driver issue, interefernce etc

i would start by installing the driver - goto the PC manufacturers website - support, drivers for you model and download the wireless drivers

next i would log into the router and change the wireless channel - use 1 or 6 or 11
Whilst logged into router I would also remove the wireless secruity if enabled to see if any of that makes a difference

[Screamer216]

i cant change the wireless channel, i can see it, but cant change it
its currently on 1
i have to open my pc to see my wireless adapter model
so it could take some time.
i'll post again as soon as i have installed the new driver.

[etaf]

i have to open my pc to see my wireless adapter model

Just need the PC make and model - to get the driver - unless you purchased and installed

Wireless Channel - whats the exact model

wireless-g linksys box

where you able to disable wireless secruity in router

Is there any reason why you are not using DHCP ?

[Screamer216]

well, this pc is built at not exactly a good store
so its not really a pc make.

that site needs a model version, 3.9, 4, 4.1, 4.2 or 4.3
i just looked and it is 4, so

BUT
when i took it out to look, and put it back in, the connection worked fine the first time i booted the pc up.
so im just gonna hold this like it is now.
im not sure if it is fixed, so im not marking this solved yet.
but, for now its working,
i'll get back here if the problem comes back in a day or 2.

ty ^^

[Screamer216]

updated my drivers, and it worked

ty for all the help
im marking this one solved

[etaf]

cool