Advertisement

There's no such thing as a stupid question, but they're the easiest to answer.
Login
Search

Advertisement

Networking Networking
Search Search
Search for:
Tech Support Guy > > >

ip address is conflicted with WAN ip submet, please entrer again!


(!)

p0ng0's Avatar
p0ng0 p0ng0 is offline
Member with 199 posts.
THREAD STARTER
 
Join Date: Sep 2007
23-May-2010, 05:44 PM #1
ip address is conflicted with WAN ip submet, please entrer again!
Hey,

So, i have a Netgear DG834 (ADSL, wired) and a Netgear WPN824v3 (switch/cable wireless)...
The DG834 address is 192.168.0.1 and the wireless is 192.168.1.1.

I want to put both devices on 192.168.0.1 network!

I have DHCP configured on the DG834, and have disabled DHCP on the WPN824...
When i add configure the IP address on the WPN824 as 192.168.0.2 it tells me 'ip address is conflicted with WAN ip submet, please entrer again!'.

I'm confused!

Any help?
p0ng0's Avatar
p0ng0 p0ng0 is offline
Member with 199 posts.
THREAD STARTER
 
Join Date: Sep 2007
23-May-2010, 05:50 PM #2
Here are screenshots of the LAN settings, sorry forgot to attach earlier! and
p0ng0's Avatar
p0ng0 p0ng0 is offline
Member with 199 posts.
THREAD STARTER
 
Join Date: Sep 2007
23-May-2010, 05:51 PM #3
JohnWill's Avatar
Computer Specs
Retired Moderator with 106,412 posts.
 
Join Date: Oct 2002
Location: South Eastern PA, USA
23-May-2010, 06:13 PM #4
Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc. Note that you should use the same SSID and encryption key for the secondary router but a non-conflicting channel. I recommend channels 1, 6, or 11 for use for the best results.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).

For reference, here's a link to a Typical example config using a Netgear router
__________________
Remember: Data you don't have at least two copies of is data you don't care about.
p0ng0's Avatar
p0ng0 p0ng0 is offline
Member with 199 posts.
THREAD STARTER
 
Join Date: Sep 2007
23-May-2010, 07:30 PM #5
In a usual situation, that would work.
i've just been on the phone with Netgear and with no help. They told me the DG only works on network 192.168.0.1 and the WPN only works on 192.168.1.1 or 10.0.0.1 even though it allows you to re-enter the ips!

So i'm no closer to where i'd like to be!

The problem is, the device i am running is on wireless, so it's 10.0.0.1 now, and the ADSL is on 192.168.0.1 and thus when i forward a port on 10.0.0.2, it will not get through as the port is blocked on 192.168.0.1 and i can't add the service as the host is on a different subnet!
TerryNet's Avatar
Computer Specs
Moderator with 65,770 posts.
 
Join Date: Mar 2005
Location: Ottawa, IL
23-May-2010, 09:04 PM #6
Maybe it would help if you told us what you are trying to do.
p0ng0's Avatar
p0ng0 p0ng0 is offline
Member with 199 posts.
THREAD STARTER
 
Join Date: Sep 2007
24-May-2010, 02:00 AM #7
iis is installed on a virtual machine that is wireless with the ip of 10.0.0.4. which is on the wpn, wireless switch. the wan is on the adsl router that has the ip of 192.168.0.1. I can open the port fr iis on the wpn attaching the host ip of .4 but on the dg834 it won't allw me to open the port on ip 10.0.0.4 as it alerts illegal ip as on dff subnet.
As Seen On

BBC, Reader's Digest, PC Magazine, Today Show, Money Magazine
WELCOME TO TECH SUPPORT GUY!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.


(clock)
THIS THREAD HAS EXPIRED.
Are you having the same problem? We have volunteers ready to answer your question, but first you'll have to join for free. Need help getting started? Check out our Welcome Guide.

Search Tech Support Guy

Find the solution to your
computer problem!




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools


Similar Threads
Title Thread Starter Forum Replies Last Post
Solved: There is an IP address conflict with another sysytem on the network robin_108 Networking 3 10-Jan-2010 12:49 AM
I Need Help With IP Address Problem With Craigslist lonestars All Other Software 5 22-Oct-2009 04:09 PM
Cursed with horrible 169 ip address and "limited or no connectivity" Oh, please help! cloropad Windows XP 6 11-Sep-2009 02:34 AM
IP address conflict while bridging networks- VISTA Black630 Networking 14 19-Jan-2009 01:35 AM
Solved: windows system error: IP address conflict robynt Networking 7 29-Dec-2008 10:24 AM

WELCOME
You Are Using: Server ID
Trusted Website Back to the Top ↑