An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: ffffe4802896e757, memory referenced
Arg2: 000000000000000c, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800022a5702, address which referenced memory
TRAP_FRAME: fffffa60065c28f0 -- (.trap 0xfffffa60065c28f0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80081e2e60 rbx=0000000000000000 rcx=fffffa80081e2e58
rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800022a5702 rsp=fffffa60065c2a80 rbp=0000000000000004
r8=fffffa80081e2e30 r9=0000000000000001 r10=000000000000000d
r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
iopl=0 nv up ei ng nz na pe nc
fffff800`022a5702 00448897 add byte ptr [rax+rcx*4-69h],al ds:0003:ffffe480`2896e757=??
Resetting default scope
I can't find any information about what to do if the process is csrss.exe. Also is says MODULE_NAME and IMAGE_NAME: hardware. Does that mean this is a hardware failure? How can i find out which hardware part it is?
I tried to roll back all drivers installed and also the windows updates. It seems to happen a lot when using IE, got worse when IE8 decided to install itself . Getting the latest driver of my videocard made it worse. rolling it back made it even more worse, so I reinstalled Cataclyst 9.5.
I really appreciate any suggestions you have.
My system specs:
Motherboard: Asus P5Q
Processor: Intel Q8200
Graphic card: ATI radeon 3600.
4gb ram, windows disk is a 2 disk raid with striping.
THIS THREAD HAS EXPIRED.
Are you having the same problem?
We have volunteers ready to answer your question, but first you'll have to join for free. Need help getting started? Check out our Welcome Guide.