Recent content by TBH

  1. T

    USB communication error message

    Hi AcaCandy, Yes I usually turn on the printer and the scanner first,but I've tried it the other way around many times too. Yes I did go back and forth. First I tried the printer and printed a test page from the printer properties window. Then I scanned a photo,trimmed it in...
  2. T

    USB communication error message

    Hi eddie5659, Yes the second one.I called Lexmark support and they told me that .exe download added to the help section directions on how to connect a USB cable to your computer. Thanks, Tim
  3. T

    USB communication error message

    Hi AcaCandy, I apologize for any confusion or inconvenience I may have caused by not telling you about my USB scanner at the very beginning. I may have made things even worse by stating too simply that the scanner works,because as you said in your post,you rightly took that to mean the...
  4. T

    USB communication error message

    Hi eddie5659, That page with the USB Plug and Play Support download from Lexmark that you told me about turned out to be only directions on how to plug a USB cable into a computer. Oh well. Thanks, Tim
  5. T

    USB communication error message

    Hi AcaCandy, Thank you for responding. I do have the CD for the motherboard that came with the computer.I'm not familiar with the Boot into Safe Mode you mentioned. I will research it and see how. I think I should say that I have a USB connected Epson Scanner that works on my computer. I...
  6. T

    USB communication error message

    Hi eddie 5659, Thank you for responding. Yes that is the driver Lexmark support had me download and install. Yes I do have WindowsME. Lexmark did not offer a USB driver. I said that Everex had a USB patch on the Everex web-site. BB USB Patch - (bbusbpatch.exe). You have to go to the...
  7. T

    USB communication error message

    Hi Aca Candy, Thank you for responding. IRQ 0 System timer OK IRQ 1 Standard 101/102-Key or Microsoft Natural Keyboard OK IRQ 2 Programmable interrupt controller OK IRQ 3 IRQ Holder for PCI Steering OK IRQ 3 VIA Tech 3038 PCI to USB Universal Host Controller OK IRQ 3 VIA Tech 3038 PCI...
  8. T

    USB communication error message

    Hi telecom 69, I have an Epson scanner and I know Epson has drivers specifically for WindowsME. Lexmark support had me download and install an updated driver from the Lexmark web-site,but I still get the same "cannot communicate" error message. Thanks, Tim
  9. T

    USB communication error message

    Hi 4 computer fix, I checked the link you sent me. It applies to a HP printer specifically.I have a Lexmark Z33. Says you must use the HP software instead of Windows USB Support with the Add New Hardware Wizard. I have tried the Lexmark software that came in the installation disc,and another...
  10. T

    USB communication error message

    Hi Eddie, Thank you for responding. There are no yellow !'s. In both USB Root Hub properties under device status says This device working properly and Exists in all hardware profiles. In both VIA TECH 3038 PCI to USB Universal Host Controller properties under device status says This device...
  11. T

    USB communication error message

    I have an Everex eXplora 1G computer with WindowsME that I bought at Best Buy in Sept. of 2000. I never used the USB connections until recently,so I didn't realize I had a problem until now that my warranty has expired. I bought a Lexmark Z33 USB connection only printer. It does not work on my...
Top