Recent content by USNJedi23

  1. U

    Advice on using an Asus Rt-AC88U router with a PON modem

    So I'm thinking I will add the Asus router and disable the wireless on the modem. Does this sound good or will I lose speed this way? I apologize, I'm dealing with a lot and a little fuzzy. Thank you for the replies and the advice.
  2. U

    Advice on using an Asus Rt-AC88U router with a PON modem

    I have fiber coming into my flat and connecting to an Eltex NTE-RG-1421G-WAC modem/router combo via the PON port. I wanted to get an Asus RT-AC88U router but I am concerned about speed loss. The Eltex NTE-RG-1421G-WAC modem/router combo does not have external antennae. I am not getting a strong...
  3. U

    group policy client service fails

    Well I found a workaround. I installed Windows 7 as an upgrade over the existing Windows 7. It seems to have fixed everything except now my AVG Firewall will not turn on.
  4. U

    group policy client service fails

    I hear you and I greatly appreciate the assist!
  5. U

    group policy client service fails

    Did the search, unable to locate it in the list.
  6. U

    group policy client service fails

    I verified that the RPC and its dependencies are running however, I cannot locate the MUP service in the services list.
  7. U

    group policy client service fails

    - Ran an ethernet diagnostic utility, no errors reported. - Uninstalled and reinstalled latest drivers for motherboard, no change.
  8. U

    group policy client service fails

    I am running a self built rig that has been in operation for over a year. About a week ago I started having a problem upon boot up. I am getting an error upon starting Windows stating group policy client service failed to start. i checked services and several com and network based services...
  9. U

    *SLI Problem Help Request*

    On my latest attempt at enabling SLI I received the BSOD with a machine check exception 0x0000009c error. I have received many similar errors in my pursuit of SLI and assume that for some reason my rig just will not except my PNY Verto Geforce 6800GS' in SLI. I am done screwing around with...
  10. U

    *SLI Problem Help Request*

    This is the latests dxdiag results. I am frustrated to the point that I am about to remove the second video card and switch the jumpers back to a single GPU setup until I can afford to upgrade the cards and try again.
  11. U

    *SLI Problem Help Request*

    Safe mode, yes.
  12. U

    *SLI Problem Help Request*

    I do have the SLI bridge on, I do see Windows loading but do not get to Desktop. I updated all the drivers, checked the BIOS on the GPUs and even rolled back the GPU drivers to the ones from the PNY website. No joy. I am not running a dual core CPU. Here is the dxdiag:
  13. U

    *SLI Problem Help Request*

    So I tried to swap the video cards between the 2 PCIe x16 slots. Both cards work as the primary, but when I enable SLI, nothing. With the cards swapped I no longer get the flashing white cursor, I get no signal. I cannot get video past the BIOS and pre windows screens.
  14. U

    *SLI Problem Help Request*

    I built a new PC for my Wife. It is mainly a DFI LANParty SLI-DR board with an AMD Athlon 64 CPU, 2 GB Corsair XMS RAM and 250 GB HDD. The PSU is an Ultra 550 X-connect 2 and the GPUs are both PNY GeForce 6800 GS PCIe. The PC runs fine except when I attempt to enable SLI mode via the nVidia...
  15. U

    Solved: *Help* PC will not boot

    I sent back the Asus board and purchased the DFI Lanparty nF4 SLI-DR board. The PC works now, so problem solved. Thank you all for your advice!
Top