bios update

  1. KiTuketu

    No Media Present - Booting Issue

    So, I don't know anything about computers for starters... So, I don't know what I'm doing... So, sorry if I get confused... Anyways... I have an Alienware m17 laptop and I went to turn it on and it looked like it was starting normally, until right after the alienware icon it was a black screen...
  2. PAULLUKAS

    Cant get my new gpu to work

    Ive made my 1rst upgrade to my now dated pc. I replaced my gt550ti with an rx580 on my pc with a asrock 890fx deluxe 5 MB and for some reason it seems to be working, the fans spinning and such, but nothing comes up on my screen. ive checked if the gpu is mounted properly, cleared my cmos...
  3. Lu Zhun

    Asus Sabertooth Z97 Mark1/3.1 BIOS Update not working.

    Hello all. I have an Asus Sabertooth Z97 Mark1/USB3.1 Motherboard and am trying to update it to the latest BIOS to see if that may help with making the M.2 NVME drive to finally work. Current BIOS version is from 2015 (2801) and the latest is: 3503 With Asus, the files are called CAP files...
  4. S

    AMD Ryzen 5 3600X

    I need to update my bios before installing the new processor but cannot figure out what bios update to select for this motherboard https://asrock.com/MB/AMD/A320M-HDV/index.asp#BIOS any assistance would be greatly appreciated. I am upgrading from a Ryzen 3 to a 5. Thanks
  5. Lu Zhun

    Windows 10 does not come out of Sleep Mode

    Upgraded from Windows 7 to Windows 10 Pro 64-bit. It goes into Sleep mode fine but anytime push a key to come back out of it.. it does nothing and has to be reset. Also it stops loading windows upon the first reset (the circles stop moving when says Loading Windows) then just stays on that...
  6. S

    Solved Problem with BIOS

    I have been trying to update my computer's bios so I can boot from USB, but it wouldn't let me update it. I have a Dell Optiplex GX260. Is there anything I can do about this?
  7. M

    Solved BIOS do not detect all RAM installed! 24GB out of 32GB

    Hello I recently updated the bios on my x99 ud4 rev 1.0 motherboard. After the update only 24gb of ram memory are recognized by bios and windows. (Bios settings on optimized default). I have 32gb of ram installed, 4x8gm balistix, same model. They all working fine as I tested the separately one...
Top