1394 net adapter TCP/IP not enabled error

[CTM2]

I used your help from other posts about the DNS error and was able to fix it but I have a new error. I currently use a Motorola SURFboard SB5101 USB Cable modem and am having an issue. I have tried repairing it and I receive a message "TCP/IP is not enabled for this enabled for this connection. Cannot proceed." I currently have 3 LAN or High-speed internet connections that are showing up. Two are the ones I have said earlier and the third is a Intel(R) PRO/100 VE Network Connection #2. All are connected and firewalled but I cannot use the internet. Any suggestions?

 

[etaf]

1394 is a firewire connection and not normally used for a network

lets see a device manager screen shot and also ipconfig /all
what firewall do you have?



------------------------------------------------------------------------
{ipconfig /all}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here
We would like to see the results from ipconfig /all post back the results here
-> Start
-> (XP - enter the following in the RUN box)
cmd /k ipconfig /all
-> (Vista or Windows 7 - enter the following in the Search box)
cmd /k ipconfig /all

A black box will appear on the screen -
rightclick in the box
select all
enter
control key + C key - to copy

then reply here and
control key + V to paste
------------------------------------------------------------------------


------------------------------------------------------------------------
{Device Manager}
Post back the results in device manager
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
windows 7
start > control panel> System and Security> Device Manager

network adaptors, click on the + > post back the devices listed there
are there any ! ? or X


post a screen shot of the device manager - network adapters

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
------------------------------------------------------------------------