3 bent pins

http://www.aerocool-uk.com/Images/power supply/turbine power/turbinePSU-2.jpg

On the right hand side of the picture you can see 3 black things jutting out. I removed the black plastic cover and their are 3 pins which where kinda bent. But i bent them back into the right place. Will this cause a prob?

 

It could go either way, if possible I would just return the PSU, never hurts to be safe.

 

or i could just use the other 2 3 pin adaptor things

 

what are they for? fans?

 

am not sure

 

Here is a better pick

http://www.aerocool-uk.com/Images/power supply/turbine power/turbinePSU-5.jpg

 

yeah.. they're for fans. as long as it's not broken off, it should be fine.

 

http://www.aerocool.us/Images/psu/turbine power/zoom5.jpg

 

If the pins are not broken off or partially broken, there's no reason they won't work. I've bent lots of pins back into place without incident. It really depends on the specifics of your situation.

 

just make sure the pins are not touching each other or the power supply case.