Acer 5315 "Unidentified Network" problem

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

ryanm1990

Thread Starter
Joined
Dec 5, 2011
Messages
1
I recently went to sky from virgin and got a new router, since then my laptop cant get internet access only Local only and says Unidentified network. The laptop works fine with other routers and other laptops work fine with my router.

Can anyone help please :)
 

etaf

Wayne
Moderator
Joined
Oct 2, 2003
Messages
65,487
how are you connected by wireless ?
have you tried connecting with a cable and does it work

can we see an ipconfig /all , and xirrus screen shot
also try a tcp/ip reset and also removing any wireless profiles - see all below

what windows version are you running

what wireless security is being used on the new router

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install

If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
Direct link to the program is here http://wpc.475a.edgecastcdn.net/00475A/XirrusWiFiInspectorSetup.1.2.0.exe

{If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You need NET Framework installed for the WiFi Inspector to function.

Run the program

A user guide is available here http://www.xirrus.com/Products/Wi-Fi-Inspector/xirruswifiinspectorguide1-2-0.aspx

post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better.

If you are using the Mac OS then use http://www.istumbler.net/
------------------------------------------------------------------------
------------------------------------------------------------------------

How to remove Wireless Profiles
http://mgmcc.forumotion.net/t109-removing-an-existing-wireless-profile
------------------------------------------------------------------------

How to remove Wireless Profiles - for Vista and Windows 7
http://mgmcc.forumotion.net/networking-tutorials-f17/removing-an-existing-wireless-profile-t109.htm
- Vista/Windows7:
http://www.tp-link.com/support/showfaq.asp?id=214
- delete the wireless profiles
Start> control Panel> classic view> network and sharing center> manage wireless networks

Delete the profiles
you will then have to enter the wireless security key for any networks you connect to - so make sure you know the correct password , and not using an incorrect password at all
------------------------------------------------------------------------

How to remove Wireless Profiles - for XP
http://mgmcc.forumotion.net/networking-tutorials-f17/removing-an-existing-wireless-profile-t109.htm
- XP
http://www.tp-link.com/support/showfaq.asp?id=186
- delete the preferred networks
start> control panel> network connections> right click on the wireless connection> listed wireless networks tab in the preferred network list click on each one and - remove button

you will then have to enter the wireless security key for any networks you connect to - so make sure you know the correct password , and not using an incorrect password at all

------------------------------------------------------------------------
------------------------------------------------------------------------

TCP/IP stack repair options for use with Vista/Windows 7

Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Note: Type only the text in bold for the following commands.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
and press enter

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
and press enter

Reboot the machine.

If you receive the message
The requested operation requires elevation.
Then please open the command prompt as administrator - as requested above
Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Please note and post back - if you receive the message
Access is Denied

Post back the results here - we need to know these commands worked correctly
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

------------------------------------------------------------------------

TCP/IP stack repair options for use with Windows XP with SP2/SP3

Start, Run, CMD to open a command prompt:

In the command prompt window that opens, type type the following commands:

Note: Type only the text in bold for the following commands.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
and press enter

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog
and press enter

Reboot the machine.

Please note and post back - if you receive the message
Access is Denied

Post back the results here
rightclick in the box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste
------------------------------------------------------------------------
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top