Tech Support Guy banner
Status
Not open for further replies.

B560M Vga led on - No signal

9K views 9 replies 3 participants last post by  managed 
#1 ·
Hey everyone, few days ago I built a new pc:

Mobo: Aorus b560m pro ax
Cpu: Intel 11400f
Psu: Seasonic 650w
Ram: 2x 8gb , A2,B2 config
Gpu: Used Gtx660ti

So everything is plugged in and powered up (2x6 pin to gpu), gpu connected using hdmi. I turn on the PC I get no signal on the screen and mobos VGA light is on. However gpu fans are spinning and gpu power leds are green too. I am asking myself if theres a problem with the GPU or the mobo? (Or something else maybe?) Thanks in advance for your advice!
 
#4 ·
To confirm, you don't these ports on the board that you said you had?

1620484016188.png


I suspect that the used GPU needs to have drivers installed, or the motherboard is using the onboard connection right now.

If you do not have these ports, please can you find an image or take an image of your board.
 
#9 ·
Problem is solved, apparently, out of the box bios doesn't support the 660ti , therefore I plugged in the new 1030 and it worked. However I needed to clear bios before. The 660ti worked only when I enabled CMS (legacy) from bios settings, meaning that I needed a more recent Gpu to use the old one so I could access bios settings.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top