Bios reset not working

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Miltos

Thread Starter
Banned
Joined
Sep 29, 2020
Messages
6
My computer had driver issues some days ago and it blue screen deathed so it auto reseted the bios settings and i went and returned my memory back to xmp and oc the cpu for first time through bios and i got black screen and i did all cmos reset methods and unplugged and plugged ram, gpu, ssd and nothing works, plsss help me
 

Miltos

Thread Starter
Banned
Joined
Sep 29, 2020
Messages
6
And for the cpu oc i did 1.4v and 4.4 which is a bit much but i thought it could handle it caz i handled it in ryzen master but not bios
 

crjdriver

Moderator
Joined
Jan 2, 2001
Messages
41,996
First of all please use proper grammar, punctuation, and spelling. Your post is difficult to understand.
Next you are posting in a hardware forum and no one [other than you] has any idea what hardware you are running. Post ALL of your exact system specs; ie exact motherboard, exact processor, etc, etc. Do not post "500W pw supply" Post the exact brand and model# Do that for ALL of your parts.
 

Miltos

Thread Starter
Banned
Joined
Sep 29, 2020
Messages
6
First of all please use proper grammar, punctuation, and spelling. Your post is difficult to understand.
Next you are posting in a hardware forum and no one [other than you] has any idea what hardware you are running. Post ALL of your exact system specs; ie exact motherboard, exact processor, etc, etc. Do not post "500W pw supply" Post the exact brand and model# Do that for ALL of your parts.
K sry for not understanding my psu is corsair bronze 650w, 2070 super windforce , 860 evo samsung 500gb, ryzen 5 3600, 2x8gb ram trident gskill 3200mhz and for motherboard i got a b450 aorus pro, pls help if u can😉
 

crjdriver

Moderator
Joined
Jan 2, 2001
Messages
41,996
I do not think you are understanding. See this quote from the forum rules.
This would also include refraining from using what's commonly referred to as "chat/text speak" (typing "u" instead of "you" or "r" instead of "are", for example) as this can lead to misinterpretation and misunderstanding. Furthermore, to make posts easier to read and understand,
As for your problem, do the following;
1 System OFF and pw cord removed, open the case
2 Pull the pw connectors from ALL drives; both hard disk and optical
3 Pull out ALL add-in cards ie sound, nic/lan, and video. You may only have a video card. Note there is a latch that must be depressed or released in order to remove the card. Do not just yank it out; you will break something
4 Disconnect any usb device ie printer, hub, whatever. Leave your keyboard connected
5 Reinstall the video card and be sure it is fully seated in the slot
6 Clear cmos with the clear pins and not by pulling the battery. Read your manual as to the location of the pins
7 Replace the pw cord and pw ON. See if the motherboard will complete POST. If it does, shutdown and start connecting devices one at a time until you find the failed part. If the board will not complete POST in the above configuration, you will need to swap parts with known good units ie motherboard, ram, pw supply, etc

Do understand the following. There is NO safe overclock. All overclocking entails some degree of risk. I have a saying; "Do not overclock with parts you cannot afford to replace"
 

Miltos

Thread Starter
Banned
Joined
Sep 29, 2020
Messages
6
I do not think you are understanding. See this quote from the forum rules.


As for your problem, do the following;
1 System OFF and pw cord removed, open the case
2 Pull the pw connectors from ALL drives; both hard disk and optical
3 Pull out ALL add-in cards ie sound, nic/lan, and video. You may only have a video card. Note there is a latch that must be depressed or released in order to remove the card. Do not just yank it out; you will break something
4 Disconnect any usb device ie printer, hub, whatever. Leave your keyboard connected
5 Reinstall the video card and be sure it is fully seated in the slot
6 Clear cmos with the clear pins and not by pulling the battery. Read your manual as to the location of the pins
7 Replace the pw cord and pw ON. See if the motherboard will complete POST. If it does, shutdown and start connecting devices one at a time until you find the failed part. If the board will not complete POST in the above configuration, you will need to swap parts with known good units ie motherboard, ram, pw supply, etc

Do understand the following. There is NO safe overclock. All overclocking entails some degree of risk. I have a saying; "Do not overclock with parts you cannot afford to replace"
thx and btw what do u mean Post and is this gonna tell me which part could be faulty? 🤔
 

crjdriver

Moderator
Joined
Jan 2, 2001
Messages
41,996
OK, I am not going to answer any more questions until you use proper punctuation and grammar. Did you even read the rules regarding how to post a question in the forum?
 

Miltos

Thread Starter
Banned
Joined
Sep 29, 2020
Messages
6
OK, I am not going to answer any more questions until you use proper punctuation and grammar. Did you even read the rules regarding how to post a question in the forum?
why are u so mad lol? 😶
 
Last edited by a moderator:

Cookiegal

Karen
Administrator
Malware Specialist Coordinator
Joined
Aug 27, 2003
Messages
118,066
Miltos,

I've edited your last post for language and given you a warning for profanity and disrespectful comments towards a Moderator.

Here is the section of the rules regarding posting a message properly:

https://forums.techguy.org/help/rules/

We also ask that everyone use proper forum etiquette when posting. This means that you should always be polite and respectful of others and profanity is never appropriate in any shape or form (even if alternate symbols are used in its place). This would also include refraining from using what's commonly referred to as "chat/text speak" (typing "u" instead of "you" or "r" instead of "are", for example) as this can lead to misinterpretation and misunderstanding. Furthermore, to make posts easier to read and understand, please use proper punctuation and capitalization, separate large blocks of text into several smaller paragraphs, limit the use of abbreviations and acronyms as many users are not familiar with them (when in doubt, spell it out) and do not use excessive formatting or type your message in all capital letters as this is considered shouting on the internet.
We expect you to comply with these guidelines when requeseting assistance.
 

Cookiegal

Karen
Administrator
Malware Specialist Coordinator
Joined
Aug 27, 2003
Messages
118,066
Since crjdriver also applied a warning with a loss of 2 points I convered mine to simply a warning with no loss of points so you're not banned for 24 hours.
 

Miltos

Thread Starter
Banned
Joined
Sep 29, 2020
Messages
6
Since crjdriver also applied a warning with a loss of 2 points I convered mine to simply a warning with no loss of points so you're not banned for 24 hours.
Who cares i just wanted help if he didnt like the way i write he should have skipped me i've applied questions to so many other sites so ban - no ban idc😉
 
Last edited by a moderator:
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top