1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

can't see system on network

Discussion in 'Networking' started by djsuckerpunch, Oct 28, 2007.

Thread Status:
Not open for further replies.
  1. djsuckerpunch

    djsuckerpunch Thread Starter

    Joined:
    Oct 28, 2007
    Messages:
    1
    I have a HP pavilion dv2000 notebook i'm running win xp pro version 2002 sp2, and have it connected to my home wireless network with two other laptops and two desktops. I can see all of the other computers in the network from my hp notebook, and can move files back and forth from it, but i cannot see my notebook on the network from any other computer in the house. i have my notebook shared, but still nothing. any suggestions? thanks!
     
  2. jmwills

    jmwills

    Joined:
    Sep 28, 2005
    Messages:
    3,477
    What third party firewalls are running?
     
  3. JohnWill

    JohnWill Retired Moderator

    Joined:
    Oct 19, 2002
    Messages:
    106,418
    Turn off any firewalls for debugging. If the firewall is the problem, you'll have to configure it to allow access to "trusted zone" addresses. Note that some firewalls must be completely uninstalled to stop them from affecting your networking.

    Start, Run, CMD to open a command prompt for the following commands.

    PING each remote computer by IP address, and if successful, PING by name. Open a command prompt as described above and type.

    PING <ip address>
    or
    PING <computer name>

    Where:
    <ip address> - is the x.x.x.x IP address
    <computer name> - is the computer name

    A failure to PING is almost always a firewall configuration issue. Any failure to PING needs to be corrected before you go any farther.

    Note: You can obtain the IP address and computer name of a computer by opening a command prompt (DOS window) and typing IPCONFIG /ALL. This should work for any Windows version. The IPCONFIG /ALL display will provide a wealth of useful information for debugging your network connection.

    Check your Services are Started on all PCs:
    • Computer Browser
    • DHCP Client
    • DNS Client
    • Network Location Awareness
    • Remote Procedure Call (RPC)
    • Server
    • TCP/IP Netbios helper
    • Workstation

    Note: You can check the services in Control Panel, Administrative Tools, Services.

    All computers should be in the same workgroup for computer browsing to function properly. File & Print Sharing has to be enabled on any computer you wish to share files or printers from. You also need to actually share the resource in question from My Computer, right click on the drive/printer/folder, and select sharing.

    If you encounter difficulties accessing computers that are visible in Network Neighborhood, make sure the computer being accessed has an account with the same name/password as the system connecting to it uses to login.

    While the default NetBIOS setting is correct for normal network configurations, it's possible for it to be altered, and it costs nothing to make sure it's correct. NETBIOS over TCP/IP must be enabled for normal network browsing.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/645068

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice