1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Connecting one printer on two networks

Discussion in 'Networking' started by flapjacksmike, Jul 1, 2012.

Thread Status:
Not open for further replies.
Advertisement
  1. flapjacksmike

    flapjacksmike Thread Starter

    Joined:
    Jul 1, 2012
    Messages:
    2
    My OS: Windows 7 64-bit

    So basically I need to hook up a HP LaserJet P2015 to a business and home network.
    HP LaserJet P2015 user guide (pg. 119 might help, PDF format): http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00623611/c00623611.pdf#page119

    I would like to keep the printer's ip static so it will stay the same on each network individually.

    I am using a business router (Linksys RV120 W Wirless-N VPN Firewall) with two VLAN (business and home network) built using this router. Also I have two access points both being used to expand this signal through out the building, but not as an extender. They are two Linksys WAP54G access points. The access points are used to expand the home network, and not the business network.

    Linksys RV120W Admin Guide: http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf

    How would I go about putting this together so that the laserjet will be accessible on both networks without allowing other devices "leak" into each other?

    Thank you for your time.
     
  2. flapjacksmike

    flapjacksmike Thread Starter

    Joined:
    Jul 1, 2012
    Messages:
    2
    Also, the majority of the computer on the business network is hard wired, and the home network is wireless.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1059265