1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Dell All-In-One 922 printer won't print black ink.

Discussion in 'Hardware' started by axeman61, Sep 20, 2011.

Thread Status:
Not open for further replies.
Advertisement
  1. axeman61

    axeman61 Thread Starter

    Joined:
    Mar 19, 2003
    Messages:
    418
    Computer OS: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
    Printer age: 7 years.

    I think I did something to my printer that is now making it so no black ink is printed. This has been going on for a while, but the need to print from home is only getting urgent now.

    A while back, I went to a place that professionally refills cartridges (since I didn't have the money to get Dell's cartridges). I got them home and almost immediately had problems with paper jams/printer misfeeds. The original ink ran out a while ago, and the printer had been just used as a spot to hold books and other things. I actually held it upside down and shook a ton of things out of there. The thing is, after doing that, the paper would still misfeed sometimes, but things would actually print.

    From there, my memory is hazy. Don't know if I shook the printer again to try to remove some more things, or it just happened, but the black ink stopped working and the color didn't. I didn't pay it much mind: I was at college (free printing) a lot and didn't need to print much. If I did need to print something, I just had the color cartridge take over. But now there's a problem because the color is dry and the black cartridge isn't.

    I'll be honest. I tried fixes. These fixes involved soaking the bottom of the cartridge in hot water or water + something. I had varying success. Before I started, it's like the printer didn't even recognize that there was a black cartridge*. I got it to the point that it could print black ink, but things would be very faded in a streaky, "scan lines" way. Since that's the best status I could achieve, I just stopped.

    *Since these are refill cartridges, it says the ink level is low on both regardless of capacity. However, the black cartridge picture just has a question mark on it.

    I was wondering if you guys had an idea on what to do. I was going to buy from Dell, but I don't think it's the cartridge at this point. I like this printer and want to keep it. However, since this printer will be 7 years old come Christmas this year, should I get a new one? I don't have much money. The most I'd be able to drop is 70 bucks. My current printer's an all-in-one, and I like the scanning capability. I'd want that again. I'd also like a printer that doesn't just wolf down ink. This printer was good at using ink when it had some to use. If any of you feel I should just go new, can you recommend an inkjet printer (I know I won't be able to get a laser for 70 bucks)?
     
  2. Oddba11

    Oddba11 Jim

    Joined:
    May 12, 2011
    Messages:
    4,648
    The best test to determine if you have a printer or ink cartridge issue is to install a new cartridge. Until you know the actual problem, you are simply wasting time and effort and could end up causing another problem.
     
  3. axeman61

    axeman61 Thread Starter

    Joined:
    Mar 19, 2003
    Messages:
    418
    Update: I need a new all-in-one printer. Do you guys know of any good ones I can get for under 70 bucks?

    Longer update: Went to the refill place again. They swapped out my cartridges for free, since apparently they have some guarantee that my cartridges (which weren't empty) met. I got the cartridges home and things worked great. I printed a couple of things to test the printer, and it worked. But then something happened: I went about 3 days without printing something, and when I came back, the bad stuff happened again. When I went to print, there was a question mark on the black cartridge. I try printing stuff and blank pages come out. It's like even the color wasn't responding. The dell help in my computer's printer program says that one thing you can do to clean cartridge heads is basically drag the bottom on a wet, lint free cloth. I did that. Now there is definitely something wrong with this printer. For whatever reason, the cartridge carriers that slide over when you open the top are stuck in the "take the cartridge out position". I put the top down, nothing happens. I turn the printer off and then on, it boots up, but makes this horrible little scrape noise at the part where the cartridges are supposed to move a bit. No movement though. I'm getting an error message about a cartridge stall. I'll look into that in case this is something I can fix. However, I'm still tired of the games with this printer, and am ready to just get a new one. I'm going to search on newegg and amazon, but I'd still appreciate you guys' recommendations here.

    Edit: Small Update - Here's a printer I'm considering:

    HP Officejet 4500 CB867A Up to 28 ppm 4800 x 1200 dpi Thermal Inkjet MFC / All-In-One Color Printer

    The thing is, I don't know anything about printers, so I don't know if there's anything in that description I should be worried about. All I care about is All-in-One capability. Do HP printers blaze through ink? This Dell, when it was working, stood tall for a while on ink.

    Remember, my limit is still around 70 bucks.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1018670