1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Digitrex 2100 Software....please Help A Sista Out =)

Discussion in 'All Other Software' started by Tanie, Sep 6, 2004.

Thread Status:
Not open for further replies.
Advertisement
  1. Tanie

    Tanie Thread Starter

    Joined:
    Sep 5, 2004
    Messages:
    6
    Hi.
    I’m trying to load software for a digitrex 2100 digital camera, which didn’t come with the camera. The CD was a burnt copy of the drivers and serial downloaded from the digitrex site. The Pc was just reformatted and has all the updates as of august 26 2004. When I install the driver, we select typical set up everything works fine until after the wizard takes over at about 35% an error comes up and says

    [B] CRC error the file C:\program files\Thalia\Manager2.0\Frame\Metal02.png doesn’t match the file in setups. cab file. The medium from which you are running the setup may be corrupt contact software vendor.

    This prompts you to either Abort Retry Ignore. [/B]

    So i went back to the digitrex site , and the driver download page isn’t working, I talked to a friend of mine in Australia and he called them telling them there was an issue with the page that was yesterday and it still isn’t working.

    What gets me is this Cd worked fine before I reformatted. The OS system is windows 98 SE

    I looked on here to see if there were any posts, and I did find a few. I did what the tech said about uninstalling and trying again but still the same error.

    Any suggestions would be helpful Id like to get my hands on non corrupt drivers but the digitrex site sucks!!! Oh and get this they only do support if your Australian or from New Zealand
    Thank you
    Tanie :)
     
  2. kiwiguy

    kiwiguy

    Joined:
    Aug 17, 2003
    Messages:
    17,584
    The problem certainly appears to be that the file is being seen as corrupt on the CD.
    Since it worked perviously, the most likely explanation is a dirty or scratched CD.
    Have you tried cleaning the CD? Warm soap and water is the easiest.
     
  3. Tanie

    Tanie Thread Starter

    Joined:
    Sep 5, 2004
    Messages:
    6
    No I havent tried that as of yet.... but im on my way to do it. I'll be back with my findings.. thanks...
    Im going to feel pretty blond if thats all it was.. =)
     
  4. Tanie

    Tanie Thread Starter

    Joined:
    Sep 5, 2004
    Messages:
    6
    No that wasn’t the issue the CD was spotless. Yet I cleaned it anyway. I tried selecting Custom settings and de selecting the sample photos and printer option to see if that might work. It got through most of the instillation part but then asked me to insert the window 98 se and when I did it still couldn’t locate the driver it needed.
    I’m Flustered :eek:
    Tanie
     
  5. kiwiguy

    kiwiguy

    Joined:
    Aug 17, 2003
    Messages:
    17,584
    There are so many possible reasons though.

    Even faulty RAM can cause these errors (installing software is usually when RAM errors show up).

    But if its now simply asking for a driver, then you need to look at -exactly- what file its looking for. It may need to be downloaded.

    I suspect that the camera is newer than the Windows 98, so its not always reasonable to assume that Microsoft would have all needed driver files installed
     
  6. Tanie

    Tanie Thread Starter

    Joined:
    Sep 5, 2004
    Messages:
    6
    Now its asking for iyuv_32dll i got it to search the windows 98 CD under dirvers it seem to accept it. but now it wont recognize the damn camera.
    Tanie
     
  7. Sponsor

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/270876

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice