DSL connection

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

cobame

Thread Starter
Joined
Apr 6, 2015
Messages
1
I have a Toshiba laptop using Windows 8. I got it over a year ago, connected to my DSL connection (that I use for my desktop) and it worked just fine. A few months ago it stopped connecting to DSL with the message that no internet is detected. I've checked cables and routers - all are fine. The computer still works fine on wi-fi but I don't have wi-fi in my home. Obviously, something was re-set somehow but I've been unable to find anything to correct it. Any suggestions? Thanks!
 

etaf

Wayne
Moderator
Joined
Oct 2, 2003
Messages
65,478
I've checked cables and routers - all are fine
ok - so you have a know working cable connected to a working port on the router

lets see an ipconfig /all
also do a tcp/ip reset

see below

------------------------------------------------------------------------
ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-windows-8/
Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.​

For windows version, XP, Vista, W7
Hold the Windows key and press R

Now type CMD

Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):​

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlighted
Next
From the notepad menu - choose Edit - Copy

Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
The results from the notepad should now appear in the forum reply.
------------------------------------------------------------------------

------------------------------------------------------------------------

TCP/IP stack repair options for use with Vista - Windows 7 - Windows 8 and Windows 10

For Windows Vista through to Windows 10
Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box (A new dialogue box - black with white font, will appear on the screen ):​

For Windows 8
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.​

In the command prompt window that opens, type the following commands:

Note: Type only the text in bold and red for the following commands.

  • Reset WINSOCK entries to installation defaults: netsh winsock reset catalog and press enter
  • Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log and press enter
  • Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log and press enter
ReStart (reboot) the machine.

If you receive the message
The requested operation requires elevation.
Then please open the command prompt as administrator - as requested above
Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):
Please note and post back - if you receive the following message :-
Access is Denied
This often occurs with windows 8

please post back the results in a reply here - its important we know that these commands have worked correctly and not produced any errors
right click in the command prompt box
select all
enter
control key + C key - to copy
then reply here and
control key + V to paste

Details also here
http://support.microsoft.com/kb/299357
also the link has a Microsoft Fix it , which will do the above for you

------------------------------------------------------------------------
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top