DVD Burning

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

zigs

Thread Starter
Joined
Apr 20, 2010
Messages
1
I am trying to burn a DVD using Nero and it is not working. I am using a Verbatim DVD+R DL disc and I have a Lite-On burner. I have used this program and disc type many time successfully. But as of lately it has not been working at all. Here is the error log that I get:

´Ó
´Ó
1A20-0218-0370-1725-8155-4331*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 0 TA 1 - 6.3.1.26
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHA - HA 0 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1613S atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3200826AS atapi Port 2 ID 0 DMA: On
=== CDRom-Device-Map ===
LITEON DVD-ROM LTD163 D: CDRom0
LITE-ON DVDRW SOHW-1693S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.4.2010
DVD-Copy on the fly
6:18:08 PM #1 Text 0 File Reader.cpp, Line 126
Reader running

6:18:08 PM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1693S running

6:18:08 PM #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
Last LBA on layer 0 = 2031343 / 0x1EFEEF / 3967MB
S01 T01 Con 0x04 Start 0 Len 3711591 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

6:18:08 PM #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 3711591 = 3711591, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

6:18:08 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

6:18:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 4062687 (902:49.12, 7934MB)
Last address to be written: 3711590 (824:47.65, 7249MB)

6:18:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

6:18:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

6:18:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:18:08 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 3711591 (3711591) = #3711591/824:47.66
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3711591 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

6:18:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7601338368, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3711591 | lead-out | 1 | 0x00 | 0x41

6:18:08 PM #12 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 4x (5,540 KB/s)

6:18:08 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:18:08 PM #14 Text 0 File DVDPlusDualLayer.cpp, Line 408
L0 Data Zone Capacity already set to 2031344 (1EFEF0h, 3967MB), requested last LBA L0 2031343 (1EFEEFh, 3967MB) ignored

6:18:08 PM #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
Burning Layer 1

6:18:08 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 514
Start writing layer 1 at address 0 (0h)

6:18:08 PM #17 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 21FEEF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MKM.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 [email protected]
25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#....
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#.........

6:18:08 PM #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 22:52,280 (1372280ms) -> OK

6:18:08 PM #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

6:24:43 PM #20 SCSI -1024 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0AAC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x03 0xC4 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03

6:24:43 PM #21 CDR -1024 File Writer.cpp, Line 304
Communication failure

6:24:43 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:24:44 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:24:47 PM #24 Phase 127 File dlgbrnst.cpp, Line 1855
Generating DVD high compatibility borders

6:26:49 PM #25 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

6:26:49 PM #26 Phase 129 File dlgbrnst.cpp, Line 1855
Generating DVD borders completed successfully

6:26:49 PM #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

6:26:49 PM #28 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 2/17/2007 7:10:33 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 4/13/2008 2:40:30 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Could someone help me with this, it is very fustrating. Thanks.
 
Joined
Sep 18, 2009
Messages
21
some things you can try to find your problem
1.try using a difrent dvd
2.try downloading a diffrent free dvd burning program from a trusted site such as cnet
3.try using your burning device on a difrent computer
its not a direct sulotion but this way you can eliminate some posibilitys :D
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Top