Error accessing NAS via OpenVPN

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

clone_car2

Thread Starter
Joined
Oct 31, 2011
Messages
1
Hi,

I am trying to access my NAS via OpenVPN. I was able to connect and ping but I cannot map the network drive. I am getting the following error message in the OpenVPN log:

[PS: I searched and found a similar old post, but I don't know where or how to make the suggested changes: http://forums.techguy.org/networking/492943-openvpn-can-someone-check-please.html]

Mon Oct 31 10:05:29 2011 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006
Mon Oct 31 10:05:29 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Mon Oct 31 10:05:29 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Mon Oct 31 10:05:29 2011 LZO compression initialized
Mon Oct 31 10:05:40 2011 UDPv4 link local: [undef]
Mon Oct 31 10:05:40 2011 UDPv4 link remote: xx.xxx.xxx.xxx:1194
Mon Oct 31 10:05:41 2011 [server] Peer Connection Initiated with xx.xxx.xxx.xxx:1194
Mon Oct 31 10:05:42 2011 Options error: Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:3: topology (2.0.9)
Mon Oct 31 10:05:42 2011 TAP-WIN32 device [Local Area Connection 2] opened: \\.\Global\{912847F2-6771-4BAB-BF61-79E0ED01AFFC}.tap
Mon Oct 31 10:05:42 2011 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {912847F2-6771-4BAB-BF61-79E0ED01AFFC} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Mon Oct 31 10:05:42 2011 Successful ARP Flush on interface [25] {912847F2-6771-4BAB-BF61-79E0ED01AFFC}
Mon Oct 31 10:05:42 2011 Warning: address 192.168.0.1 is not a network address in relation to netmask 255.255.255.0
Mon Oct 31 10:05:42 2011 ROUTE: route addition failed using CreateIpForwardEntry: One or more arguments are not correct. [if_index=25]
Mon Oct 31 10:05:42 2011 ROUTE: route addition failed using CreateIpForwardEntry: One or more arguments are not correct. [if_index=25]
Mon Oct 31 10:05:42 2011 Initialization Sequence Completed


Here is my server config:


Code:
# OpenVPN server configuration QNAP NAS
# basic settings
port 1194
proto udp
dev tun
#
# detect mtu if the connection is slow.
; mtu-test
#
# define mtu, if necessary
; tun-mtu xyz
#
# define the ip-addresses of the underlying tunnel 
server 10.8.0.0 255.255.255.0
#
# Route 
push "route 192.168.0.1 255.255.255.0"   #  <--- Enter the ip-address of your home network here!
#
# certificates & keys
dh /opt/etc/openvpn/keys/dh1024.pem
ca /opt/etc/openvpn/keys/ca.crt
cert /opt/etc/openvpn/keys/server.crt
key /opt/etc/openvpn/keys/server.key
#
# data compression
comp-lzo
#
# allow, that several clients with the same common name log on
; duplicate-cn
#
# different clients can "see" each other through the tunnel.
; client-to-client
#
# Keepalive
keepalive 15 120
#
# verbosity of status messages in the console. Activate for debugging (1-9 possible)
; verb 5
#
# Log files
; status /share/HDA_DATA/optware/opt/etc/openvpn/log/status.log
; log-append /share/HDA_DATA/optware/opt/etc/openvpn/log/openvpn.log
# 
# Run as daemon (activate, after everything is set up properly)
; daemon
#
# Management Interface. Access with "telnet localhost 7505"
management localhost 7505

Here is the client config:



Code:
# connect to QNAP OpenVPN Server
#
proto udp
dev tun
tls-client
remote xxx.xxxxxxxx.com 1194  #  <--- enter your dyndns-account here!
pull
# set mtu, if necessary
; tun-mtu xyz
#
resolv-retry infinite
nobind
persist-key
persist-tun
# certificates and keys
# Note the double \\ in the path for a windows config
ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt"
cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt"
key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key"
#
comp-lzo
Thanks
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top