1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Error on startup code: 0xc0000098 no os

Discussion in 'Windows 7' started by Jboy92, Feb 22, 2013.

Thread Status:
Not open for further replies.
  1. Jboy92

    Jboy92 Thread Starter

    Joined:
    Feb 22, 2013
    Messages:
    1
    Hello
    Let me begin on saying hello and what a mare and bad luck I have had over the last day.
    Basically my syste was doing a windows system restore due to ie9 being corrupted and know way round a fix everything I done nothing worked. This is where the bad luck came in and during the system restore the power in my area decided to have a funny 5 seconds and well system restore didn't finish because of power cut. Turned computer back on and bam due to my astonishment everything gone tits up. Receiving error code. 0xc0000098 no operating software found. Tried looking on Internet for fix nothing. I managed to create a recovery disc of girlfriends windows 7 computer however system repair doesn't work it says that know operating software is found. Try looking for fixes but nothing.
    Can't believe this has happened
    System is.
    Windows 7 64 bit
    Hp pavilion slimline s5765uk

    Any ideas please please?
    Jboy
     
  2. Mark1956

    Mark1956

    Joined:
    May 7, 2011
    Messages:
    14,142
    Please run this tool so we can see what is on the system. A power cut in the middle of a System Restore could have caused a lot of damage to the registry so a clean install might be the only way out. Have you got backups of all your important data? Ubuntu Live CD to back up files from your dead Windows

    NOTE: Unless otherwise advised please use a clean working PC to download and copy FRST to a Flash Drive.
    Use these links to download the correct version for your operating system and save it to the Flash Drive.
    For x32 (x86) bit systems download Farbar Recovery Scan Tool 32-Bit
    For x64 bit systems download Farbar Recovery Scan Tool 64-Bit

    NOTE: For Windows 7 systems only: If you cannot get Option 1 to work you can make a Recovery disc to use for Option 2.
    Just do this: Click on Start > Control Panel and select Backup and Restore. In the left hand pane select Create a System Recovery disc and follow the prompts.
    This can be done on any Windows 7 PC but it must have the same bit rate as the infected PC, i.e. 64 or 32bit.

    Plug the flashdrive into the infected PC.

    Enter System Recovery Options by using Option 1 or Option 2
    STEP 1
    Option 1
    To enter the System Recovery Options from the Advanced Boot Options:

    • Restart the computer.
    • As soon as the BIOS is loaded begin tapping the F8 key until the Advanced Boot Options menu appears.
    • Use the arrow keys to select Repair your computer and hit the Enter key. If Repair your computer is not in the menu you will need to follow Option 2 below.
    • Select US as the keyboard language settings, and then click Next. If you know your keyboard is for another language then select that from the list.
    • The system will scan for installed operating systems. Select the operating system you want to repair, and then click Next.
    • Select your user account and click Next. If there is only one user account this will go straight to the System Recovery Options.
    • Now go to the instructions for STEP 2.


    Option 2
    To enter the System Recovery Options by using a Windows installation or Recovery disc:

    • Insert the Installation or Recovery disc.
    • Restart your computer.
    • If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
    • Click Repair your computer. NOTE: This Option will be skipped if using a Recovery disc.
    • Select US as the keyboard language settings, and then click Next. If you know your keyboard is for another language then select that from the list.
    • The system will scan for installed operating systems. Select the operating system you want to repair, and then click Next.
    • Select your user account and click Next. If there is only one user account this will go straight to the System Recovery Options.
    • Now go to the instructions for STEP 2.


    NOTE: If you are unable to complete either Option 1 or 2 then stop and let me know. This tool will only run correctly if you are able to get to the System Recovery Options menu.

    STEP 2
    On the System Recovery Options menu you will get the following options:

    Startup Repair
    System Restore
    Windows Complete PC Restore
    Windows Memory Diagnostic Tool
    Command Prompt


    • Select Command Prompt
    • In the command window type in notepad and press Enter.
    • The Notepad opens. Click on File and select Open.
    • Select Computer and find your flash drive below Devices with Removable Storage make a note of the drive letter and close Notepad.
    • In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
      Note: Replace letter e with the drive letter of your flash drive.
      NOTE: if you receive an error message "the system cannot find the drive specified" go back into Notepad and check the drive letter for the Flash Drive, also note the letter can change on subsequent runs.
    • The tool will start to run.
    • When the tool opens click Yes to disclaimer. (This may not appear on all systems).
    • Press the Scan button. The progress bar may freeze for a while which is normal, leave it undisturbed and it will complete the scan.
    • It will make a log (FRST.txt) on the flash drive. Put the Flash drive back in a working PC, open Windows Explorer and then click on the Flash Drive. Double click on FRST.txt then Copy & Paste the log into your next reply. Please DO NOT send the log as an attachment.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1090577

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice