1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

file sharing from xp to vista

Discussion in 'Networking' started by scott1e2, Jun 30, 2009.

Thread Status:
Not open for further replies.
  1. scott1e2

    scott1e2 Thread Starter

    Joined:
    Mar 24, 2007
    Messages:
    12
    Hi Guys

    i am currently having problems transferring old files from my xp home machine to my vista machine, my xp machine is showing on my network on my vista machine but it says it cannot access the machine. i have followed several online tutorials and made all the changes i believe i needed to make but it still wont work. I have connnected these machines via a x over cable as my router is in another room (if that makes any difference?) also my xp machine will nt show up my vista machine on the network..

    if anyone could help i would be extremely grateful

    many thanks in advance

    S
     
  2. JohnWill

    JohnWill Retired Moderator

    Joined:
    Oct 19, 2002
    Messages:
    106,418
    Turn off any firewalls for debugging. If the firewall is the problem, you'll have to configure it to allow access to "trusted zone" addresses. Note that some firewalls must be completely uninstalled to stop them from affecting your networking.

    Hold the Windows key and press R, then type CMD to open a command prompt.

    In the command prompt window that opens, type type the following commands:

    PING each remote computer by IP address, and if successful, PING by name. Open a command prompt as described above and type.

    PING <ip address>
    or
    PING <computer name>

    Where:
    <ip address> - is the x.x.x.x IP address
    <computer name> - is the computer name

    A failure to PING is almost always a firewall configuration issue. Any failure to PING needs to be corrected before you go any farther.

    Note: You can obtain the IP address and computer name of a computer by opening a command prompt (DOS window) and typing IPCONFIG /ALL. This should work for any Windows version. The IPCONFIG /ALL display will provide a wealth of useful information for debugging your network connection.

    Check your Services are Started on all PCs:
    • COM+ Event System (for WZC issues)
    • Computer Browser
    • DHCP Client
    • DNS Client
    • Network Connections
    • Network Location Awareness
    • Remote Procedure Call (RPC)
    • Server
    • TCP/IP Netbios helper
    • Wireless Zero Configuration (XP wireless configurations)
    • WLAN AutoConfig (Vista wireless configurations)
    • Workstation

    Note: You can check the services in Control Panel, Administrative Tools, Services.

    All of these services should be started, and their startup type should be automatic.

    If a service is not running, open it's properties and check the dependencies. Check each of the dependencies and see which one is preventing the service from running. Checking the event log is also a good idea here, there may be clues to what is failing.


    All computers should be in the same workgroup for computer browsing to function properly. File & Print Sharing has to be enabled on any computer you wish to share files or printers from. You also need to actually share the resource in question from My Computer, right click on the drive/printer/folder, and select sharing.

    If you encounter difficulties accessing computers that are visible in Network Places (Network and Sharing Center in Vista), make sure the computer being accessed has an account with the same name/password as the system connecting to it uses to login. NOTE: Vista's default is to require a password on the account to enable file/print sharing.

    While the default NetBIOS setting is correct for normal network configurations, it's possible for it to be altered, and it costs nothing to make sure it's correct. NETBIOS over TCP/IP must be enabled for normal network browsing. You can open a command prompt as described above and type the following command: nbtstat -n. This will display the status of NetBIOS or indicate it's not configured.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/839361

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice