Help with BSOD

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

kwheeler7

Thread Starter
Joined
Jan 10, 2004
Messages
149
I hope someone can help me. I have a laptop (Imperial Computer MS2137) That I have had problems with for a week now. It has a Intel Pentium M Processor 1600MHz and 2- 500 meg sticks of RAM. I was constantly getting BSODs until it wouldn't even boot up at all. The HD light wasn't even coming on. I tested the Seagate HD with Seagate Tools and It said the HD was toast. It was only a 20G HD so I replaced it with a 160. Installed XP Pro and was getting them again. The CD I installed it with was a Slipstream version of my original with SP3 added. I figured maybe I screwed it up so I did a repair install with my SP2 CD. Same problem. I did another clean install and everything seemed okay so I updated XP to SP3 and updated all the drivers Tuesday night.

Next morning I start it up and BSOD is back. I got 10 today.

1. Bugcheck: 0x1000008e (0xc0000005, 0x8054bbb4, 0xede99840, 0x0000000) No Message
2. Bugcheck: 0x10000050 (0xfd9cfc41, 0x00000001, 0x8054bbb4, 0x0000000) Page_Fault_In_Nonpaged_Area
3. Bugcheck: 0x1000008e (0xc0000005, 0x8054c0b9, 0xee4d7354, 0x0000000) No Message
4. Bugcheck: 0x1000007e (0xc0000005, 0x8054c0b9, 0xf7a99868, 0xf7a99564) No Message
5. Bugcheck: 0x1000008e (0xc0000005, 0x80568852, 0xee055b5c, 0x0000000) No Message
6. Bugcheck: 0x1000000a (0x00000028, 0x00000002, 0x00000000, 0x80502e24) Irql_Not_Less_Or_Equal
7. Bugcheck: 0x10000050 (0xe17ccbe0, 0x00000001, 0x8054bbf0, 0x0000001) Pfn_List_Corrupt
8. Bugcheck: 0x1000008e (0xc0000005, 0x8054bbb4, 0xee3d2840, 0x0000000) No Message

I have 2 others but didn't get the Bugcheck numbers. They had messages.
9. Bad_Pool_Header
10. Win32k.sys

Zip of all Minidumps attached.

Anyone have any ideas. Thanks in advance.
 

Attachments

Joined
Jul 28, 2008
Messages
1,092
Kwheeler7 I am still learning how to read these, as it takes some serious practice to get the idea.
So I copied the important info for you so you can get a very basic idea of what is happening...
Best Guess you may have bad memory or too many cards plugged into all the PCI AGP slots on your PC.
Try a memory test first several hours needed… and then remove anything you don't need, an old modem card maybe what ever just try it and see what happens...
___________________________________________________________________
BugCheck 1000000A, {28, 2, 0, 80502e24}

Probably caused by : memory_corruption ( nt!MiReleaseConfirmedPageFileSpace+1d )

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.

CUSTOMER_CRASH_COUNT: 6

DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

BUGCHECK_STR: 0xA

PROCESS_NAME: SfCtlCom.exe

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP: 480f223d

IMAGE_NAME: memory_corruption
_____________________________________________________________________

BugCheck 10000050, {e17ccbe0, 0, 8054bbf0, 1}

Could not read faulting driver name
Probably caused by : ntoskrnl.exe ( nt!ExAllocatePoolWithTag+6e6 )

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory

Could not read faulting driver name

READ_ADDRESS: e17ccbe0

FAULTING_IP:
nt!ExAllocatePoolWithTag+6e6
8054bbf0 668b0e mov cx,word ptr [esi]

MM_INTERNAL_CODE: 1

CUSTOMER_CRASH_COUNT: 7

DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

BUGCHECK_STR: 0x50

PROCESS_NAME: System

LOCK_ADDRESS: 805591e0 -- (!locks 805591e0)

Resource @ nt!PiEngineLock (0x805591e0) Available

WARNING: SystemResourcesList->Flink chain invalid. Resource may be corrupted, or already deleted.


WARNING: SystemResourcesList->Blink chain invalid. Resource may be corrupted, or already deleted.
_____________________________________________________________________

BugCheck 1000008E, {c0000005, 8054bbb4, ee3d2840, 0}

Probably caused by : ntoskrnl.exe ( nt!ExAllocatePoolWithTag+673 )

CUSTOMER_CRASH_COUNT: 8

DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

BUGCHECK_STR: 0x8E

PROCESS_NAME: AGRSMMSG.exe
_____________________________________________________________________

BugCheck 1000008E, {c0000005, bf8bb61c, f79f9054, 0}

Probably caused by : memory_corruption

Followup: memory_corruption

CUSTOMER_CRASH_COUNT: 9

DEFAULT_BUCKET_ID: CODE_CORRUPTION

BUGCHECK_STR: 0x8E

PROCESS_NAME: csrss.exe

MODULE_NAME: memory_corruption

IMAGE_NAME: memory_corruption

FOLLOWUP_NAME: memory_corruption

____________________________________________________________________

BugCheck 1000000A, {d, ff, 0, 804e8916}

Probably caused by : ntoskrnl.exe ( nt!ExIsResourceAcquiredExclusiveLite+11 )

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
____________________________________________________________________
 

kwheeler7

Thread Starter
Joined
Jan 10, 2004
Messages
149
This is a laptop. There are no PCI AGP cards to unplug. I am running memtest right now. There are 2 memory sticks and 2 slots. I am running it over night with only 1. I will then swap it to the other slot then do the same with the other stick. I will get back when that is complete.

What is ntoskrnl.exe?

Thanks
 
Joined
Jul 28, 2008
Messages
1,092
kwheeler7, this will get you started;
http://www.google.com/search?q=ntos...s=org.mozilla:en-US:official&client=firefox-a
It will require some serious research and I am limited on time so I will do my best and there are lots of great people here that can and will jump in to help so hang in there :)

**Also these exe's are referenced in the reports;
AGRSMMSG.exe... Modem Driver??? try uninstalling and reinstalling or rolling back or getting the newest one from the manufacturer and stay away from the drivers at windows update site...
AGRSMMSG.exe
http://www.google.com/search?q=agrs...s=org.mozilla:en-US:official&client=firefox-a
----------------------------------------------------------------------------------------------
csrss.exe
http://www.google.com/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=J8k&q=csrss.exe&btnG=Search
-----------------------------------------------------------------------------------------------
SfCtlCom.exe
http://www.google.com/search?hl=en&...lla:en-US:official&q=SfCtlCom.exe&btnG=Search
 

kwheeler7

Thread Starter
Joined
Jan 10, 2004
Messages
149
I think this all might be memory related. I ran memtest on each of the 2 memory modules. One of the modules comes up with errors only when put in slot 2. It doesn't show errors in slot 1. The other module shows no errors in either slot. I am going to try running XP with each one alone in each slot and see what comes up.
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top