1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Help with my GPU and Motherboard

Discussion in 'Hardware' started by Zile, Apr 3, 2019.

Thread Status:
Not open for further replies.
  1. Zile

    Zile Thread Starter

    Apr 3, 2019
    Hi can anybody say can i use asus rx580 4gb on GA-M68MT-S2P (rev. 3.0) motherboard
  2. lynx1021


    Jan 7, 2014
    I saw where some were running the AMD RX 580 on a GA-P45T-ES3G, a socket 775 intel from 2011 with a regular bios , Some of the newer cards require the Uefi bios.
    https://www.userbenchmark.com/UserRun/4027509 I have a XFX RX 460 on my GA-P45T-ES3G legacy bios but it may be the XFX brand. Make sure you can return it if it doesn't work.
    You have to make sure you have the extra power connectors for it also on your PSU.
    Requires a minimum Quality 500 watt PSU
    Last edited: Apr 3, 2019
  3. Macboatmaster

    Macboatmaster Trusted Advisor Spam Fighter

    Jan 14, 2010
    The answer is both YES and NO
    Yes you could if it would fit in the case
    The board is micro ATX and if your case is micro you may have real problems
    The card
    as you can see is dual width and whilst that in itself may not be a problem the overall dimensions are
    9.53 " x 5.07 " x 1.49 " Inch
    24.2 x 12.89 x3.8 Centimeter
    as here from the Asus site

    Now dealing with the actual card on that board - you are trying to gain benefits which you will NOT
    the card is way in advance of the board
    Looking back to the first link I sent you - you will see
    PCI-Express 3.0 x16
    Power Connectors
    1 × 8-pin
    > 185 W
    Recommended PSU
    500 W

    On that board you do not have PCI-E 3.0
    The PCI-E 3.0 is backwards compatible but the speed of the processing on the GPU chip will be limited by your PCI-E slot which is version 1.0
    So basically you are wasting your money to some extent

    It will work but the speed of transfer on the slot will not match the capabilities of the card

    Plus although I would say it is not worthwhile, if you do go ahead check the PSU as above and the fit as mentioned
    Last edited: Apr 3, 2019
    lynx1021 likes this.
  4. Macboatmaster

    Macboatmaster Trusted Advisor Spam Fighter

    Jan 14, 2010
    I think I am correct in saying that you have asked the same question on another site and have received replies
    Indicating on the other site some more details of your system
    Although I thought your motherboard was DDR3 ram not DDR4

    I am not suggesting for one moment that there is anything wrong in asking the same question on more than one site.
    However if you do not still need advice from this site, then if you could kindly indicate that, by marking your topic solved, by clicking mark solved on your opening post that would be greatly appreciated.

    If of course you wish to ask some questions regarding the advice e received here, than it will be our pleasure to assist you.
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1225350

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice