How to connect tp-link adsl router with belkin wireless router???

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

rjkumar33

Thread Starter
Joined
Jan 13, 2013
Messages
7
Hi friends ...

I hav bsnl broadband connection in my home.... I connected a tplink wired for browsing...

I also have a belkin wireless router..... I connected those routers.... And only wired communication is possible


and i cant access in wireless connection... Pls help me :( :( :(

i m sttuggling.... :( :(
 

etaf

Moderator
Joined
Oct 2, 2003
Messages
65,435
First Name
Wayne
can we have the exact models
also to connect two routers together - you need to do the following


------------------------------------------------------------------------

Connecting two (or more) SOHO broadband routers together

Connecting two (or more) SOHO broadband routers together
From a John Will Post :)

http://library.techguy.org/wiki/Connecting_two_SOHO_broadband_routers_together

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).

For reference, here's a link to a Typical example config using a Netgear router

------------------------------------------------------------------------
 

rjkumar33

Thread Starter
Joined
Jan 13, 2013
Messages
7
hey dude all are works well with the wired in my belkin but wireless can't work...


belkin router links with my phone wifi but can't open internet
 

etaf

Moderator
Joined
Oct 2, 2003
Messages
65,435
First Name
Wayne
belkin router links with my phone wifi but can't open internet
so no device is working with your wireless router - is that correct

as i say you need to set up differently

can we have the exact models of the routers

with a PC connected to the main router - which is connected to the cable/telephone
can we see an ipconfig /all
 

rjkumar33

Thread Starter
Joined
Jan 13, 2013
Messages
7
hey dude i connected my bsnl serial cable to tplink and the lan out from tplink to belkin...

now i get the internet from the belkin via wired... k

but i can't get internet from the wireless... but wireless links with my devices but no internet in all
 

etaf

Moderator
Joined
Oct 2, 2003
Messages
65,435
First Name
Wayne
can we have the exact models of the routers

with a PC connected to the main router - which is connected to the cable/telephone
can we see an ipconfig /all
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top