How to connect vpn client and internet wireless adapter simultaneously

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

justbow

Thread Starter
Joined
Nov 27, 2011
Messages
1
Hi,

My PC running on Windows 7.
I'm connected Internet via Wireless adapter.
And here is the route print :

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.41 25
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.1.0 255.255.255.0 On-link 192.168.1.41 281
192.168.1.41 255.255.255.255 On-link 192.168.1.41 281
192.168.1.255 255.255.255.255 On-link 192.168.1.41 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.41 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.41 281
===========================================================================
After that i try connect use vpn network.
And here is the route print after connected to vpn.

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.41 25
0.0.0.0 0.0.0.0 192.168.102.1 192.168.102.246 26
62.217.135.78 255.255.255.255 192.168.1.1 192.168.1.41 100
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.1.0 255.255.255.0 On-link 192.168.1.41 281
192.168.1.0 255.255.255.0 192.168.102.1 192.168.102.246 281
192.168.1.1 255.255.255.255 On-link 192.168.1.41 100
192.168.1.41 255.255.255.255 On-link 192.168.1.41 281
192.168.1.41 255.255.255.255 192.168.102.1 192.168.102.246 281
192.168.1.255 255.255.255.255 On-link 192.168.1.41 281
192.168.102.0 255.255.255.0 On-link 192.168.102.246 281
192.168.102.246 255.255.255.255 On-link 192.168.102.246 281
192.168.102.255 255.255.255.255 On-link 192.168.102.246 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.41 281
224.0.0.0 240.0.0.0 On-link 192.168.102.246 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.41 281
255.255.255.255 255.255.255.255 On-link 192.168.102.246 281
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 192.168.102.1 1
===========================================================================
But after connect VPN i'm not able to connect Internet anymore. I think because there are 2 gateway in there. and the default gateway become vpn network.
In my case. How to connect vpn client and internet wireless adapter simultaneously?

Thanks in advance
 
Joined
Jun 26, 2010
Messages
444
If you're using a PPTP VPN connection, the PPTP clients defaults to sending all traffic (even Internet traffic) through the VPN. You will need to go into the PPTP network properties and uncheck the box for the option to send all traffic over the VPN connection.
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top