how to host behind a SMC router

Hi,
I have a SMC Barricade (SMC7004ABR) router, cable internet, am using no-ip, and Apache 2.

I can not seem to get may router to let me past my local ip.

Does anyone have a SMC router with a server behind it and if so what do I need to do to get mine to work.

Thanks
~ ~ NEONWATERS ~ ~

 

You need to go to the virtual server section and include any ports for services there. Note that you can open them for UDB and/or TCP in any combination.

 

I have done that and it still does not seem to work.
I have port 80 and 81 set.
I have tested my server when connected strait to my cable modem and it works so I know it is my router messing something up.

In virtual server I set the following:
Private IP <> Private Port <> Type <> Public Port
1. local ip #.#.#.# <> 80 <> TCP <> 80
2. local ip #.#.#.# <> 81 <> TCP <> 81

Then I should be able to use my real ip to access my server right...? Well it does not work.

H E L P!!!

Thanks,
~ ~ NEONWATERS ~ ~

 

I'd also setup the same two ports as UDP on the same page. Finally, I'd go to the next page and setup 80 and 81 as trigger ports too.

I know that FTP will work with this setup, since that's how I use mine.