ICH9R / Vista / Raid5 Problem...

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

spitcool

Thread Starter
Joined
Oct 28, 2007
Messages
1
Hello all, I am new to the forum because of a specific issue I am having.

I recently built a new computer with an ASUS P5K Deluxe, Intel Core 2 Quad, and three WD 500GB SATA 300 drives (identical). Using the ICH9R functionality, I set up a RAID 5 array (for storage and redundancy). I did a fresh install of VISTA with all the latest drivers, and the Intel Matrix 7.6 Storage Manager. After about a week, the computer rebooted itself at random (I was away, and the computer was idle. ) I came back and the system was rebooted, saying it could not find a boot device. After restarting and entering the ICH9R config utility in the bios, it said that all the drives were good, but the array was failed, so I chose to rebuild. 36 hours later, it was fine. About 6 hours after that, I was checking my email, and a balloon notification popped up saying that my array was being rebuilt AGAIN. Totally confused, I rebooted, and then my THEME service did not start, and the array continued to rebuild itself. Nothing in the event log pertaining to this at all. Any ideas???

Thanks in advance. I am totally stumped.
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top