1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

ICS Help

Discussion in 'Windows XP' started by Tomahawk, Jan 26, 2002.

Thread Status:
Not open for further replies.
  1. Tomahawk

    Tomahawk Thread Starter

    Joined:
    Jan 26, 2002
    Messages:
    2
    My Windows 2000 ICS firewall won't allow me to host a game with my ps2. I need to know how to open holes in my firewall so that my game will be posted and that others may join it???
     
  2. eddie5659

    eddie5659 Moderator Malware Specialist

    Joined:
    Mar 19, 2001
    Messages:
    36,135
    Hiya

    I assume you know the ports that you need to open. Try this:

    To configure Internet connection sharing for applications and services

    1.Open Network and Dial-up Connections
    2.Right-click the shared connection, and then click Properties.
    3.On the Sharing tab, verify the Enable Internet connection sharing for this connection check box is selected, and then click Settings.
    4.If you want to configure a network application for the computers sharing the connection, on the Applications tab, click Add, and then do the following:
    In Name of application, type an easily recognized name for the application.
    In Remote server port number, type the port number of the remote server where the application resides, and then click either TCP or UDP.
    In TCP or UDP or both, type the port number for the port on your home network that the application will connect to. Some applications require TCP and UDP port numbers.
    5.If you want to configure a service to provide to users on remote networks, on the Services tab, click Add, and then do the following:
    In Name of Service, type an easily recognized name for the service.
    In Service port number, type the port number of the computer where the service resides, and then click either TCP or UDP.
    In Name or address of server computer on private network, type the name or TCP/IP address of the computer on your home network where the service resides.
    Important

    If you do not know the values for the remote server port number, incoming response port numbers, or the service port number, see your system administrator.
    Note

    To open Network and Dial-up Connections, click Start, point to Settings, and then click Network and Dial-up Connections.
    To configure Internet connection sharing, you must be logged on as an Administrator or a member of the Administrators group.
    You must enable Internet connection sharing to configure applications and services.

    http://www.microsoft.com/windows200...professional/help/howto_share_conn_config.htm

    Regards

    eddie
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/66584

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice