IRQ conflict Question

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

brosssf1

Thread Starter
Joined
Apr 6, 2010
Messages
9
Does anyone know if IRQ conflicts mean anything since I'm having crash problems?

Resourses Device
I/O Port 0x0000A000-0x0000AFFF VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x0000A000-0x0000AFFF RADEON 8500 / RADEON 8500 LE (Microsoft Corporation)

I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller

I/O Port 0x000003C0-0x000003DF VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003C0-0x000003DF RADEON 8500 / RADEON 8500 LE (Microsoft Corporation)

IRQ 21 VIA Rev 5 or later USB Universal Host Controller
IRQ 21 VIA Rev 5 or later USB Universal Host Controller
IRQ 21 VIA Rev 5 or later USB Universal Host Controller
IRQ 21 VIA Rev 5 or later USB Universal Host Controller
IRQ 21 VIA USB Enhanced Host Controller

Memory Address 0xE0000000-0xEFFFFFFF VIA CPU to AGP2.0/AGP3.0 Controller
Memory Address 0xE0000000-0xEFFFFFFF RADEON 8500 / RADEON 8500 LE (Microsoft Corporation)

Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF VIA CPU to AGP2.0/AGP3.0 Controller
Memory Address 0xA0000-0xBFFFF RADEON 8500 / RADEON 8500 LE (Microsoft Corporation)

I/O Port 0x000003B0-0x000003BB VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003B0-0x000003BB RADEON 8500 / RADEON 8500 LE (Microsoft Corporation)

The system I'm using

abit vt7 mother board
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name BOBS-889A519078
System Manufacturer PT880_
System Model AWRDACPI
System Type X86-based PC
Processor x86 Family 15 Model 3 Stepping 3 GenuineIntel ~3215 Mhz
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 8/27/2004
SMBIOS Version 2.2
Windows Directory D:\WINDOWS
System Directory D:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name BOBS-889A519078\Bob
Time Zone Pacific Standard Time
Total Physical Memory 4,096.00 MB
Available Physical Memory 445.66 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 1.83 GB
Page File D:\pagefile.sys
 

JennyJackson01

Account Closed
Joined
Apr 3, 2010
Messages
638
Hiya brosssf1.

Not sure about the conflicts although you could always take all PCI cards and USB attachments out and then reboot, putting them back in one at a time. Leave the AGP/PCI-E graphics card in place as that probably isn`t the cause. Also try re-installing the MoBo drivers.

As a side-note, why is the system on D drive? Are you running a dual-boot system by any chance in which case, what`s on C drive?

Jenny
 

brosssf1

Thread Starter
Joined
Apr 6, 2010
Messages
9
yes that is a good question ..the drive situation, I'm guessing because i left a memory card in the printer when i just recently reinstalled XP, which shows up as a drive ....drive c: It currently shows up as a shortcut to drive D:\??? How does one change this back to C:\... or eliminate ??
 

JennyJackson01

Account Closed
Joined
Apr 3, 2010
Messages
638
Hiya brosssf1.

With the machine off, either take the card out of the printer or unplug the printer for the time being. Now boot it up and right-click on `My Computer` then left-click on `Manage`. Under the Storage menu, click `Disk Management` to show all attached storage drives.

Most drives can be changed in this program other than the system drive. Right-click on the drive in the right hand pane and choose `Change Drive Letter` and once changed, make sure you reboot and let Windows find the `new` drive.

It might not let you change the system drive as it doesn`t like being changed while it`s running which is a catch 22 situation. One way round it is to use something like Partition Magic to change the system drive, set up drive letter mapping and let it reboot to do it`s work before the system takes hold but if you`ve never messed about with PM, it`s probably easier to format and re-install if you`re really worried about it. At least that way, you`ll install to the default C drive and it`ll clear out any junk you`ve accumulated !

Jenny
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Members online

Top