1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

MSI MS-6511 KM133 Socket A Motherboard

Discussion in 'Hardware' started by zenon79, Aug 24, 2005.

Thread Status:
Not open for further replies.
Advertisement
  1. zenon79

    zenon79 Thread Starter

    Joined:
    Aug 24, 2005
    Messages:
    7
    I bought this motherboad to complete a backup computer, my gripe is that There's isn't anything labeled on his board. I don't know where to connect the cables for the front panel or the usb 2 pin connectors. There's not alot on the net about this board at all and the only page that I did find had the following description for the pins: HD POWER, DR BLINK GRN, HDA, GND, HDR BLINK YEL, FP BUT in, FP RESET, GND, FPSLP, +5V, IRRX, IRTX, IR P. Now here's what on the front panel cables: Power SW, Reset Sw, Power Led + and - HD LED. Now I understand what the panel connectors mean, but if anyone can decifer what the hell the other stuff on the board means, please let me know. I don't wanna screw around and fry this board, but I've built lots of computers but I never came accorss this problem before. PLEASE HEEEEEEEEEEEEEEEEELLLLLLLLLLLPPPPPPPPPPP
     
  2. Conrad747

    Conrad747

    Joined:
    Jul 28, 2004
    Messages:
    362
    Where did you buy this motherboard? I am trying to get at least a link.
     
  3. Conrad747

    Conrad747

    Joined:
    Jul 28, 2004
    Messages:
    362
  4. zenon79

    zenon79 Thread Starter

    Joined:
    Aug 24, 2005
    Messages:
    7
    Thanks alot, I have that page already printed out but the JFP1 connectors is where I'm having the problem. I don't know what the hell those descriptions mean. On my system my connector have Power SW, Reset SW, Power LED +, Power LED -, and HD LED, but I can't find not even one page giving me a clear description of where I'm supposed to plug my connectors into
     
  5. obvious

    obvious

    Joined:
    Nov 2, 2004
    Messages:
    355
  6. zenon79

    zenon79 Thread Starter

    Joined:
    Aug 24, 2005
    Messages:
    7
    I already have that link, but if your confused with what the JFP1 means, here's what I got from the seller of this board:
    Power LED (HDR Blink GRN & HDR Blink YEL)
    HDD LED (HD PWR & HDA)
    Reset Sw (GND & FP Reset)
    Power Sw (FPSLP & +5V)
     
  7. Forgotten1

    Forgotten1

    Joined:
    Aug 19, 2005
    Messages:
    11
    I don't know if I could help you out much since I tried out a few arrangements on my motherboard, but I really don't know how to test it with a "dead" motherboard. All I can really assure you is it turns on and the Power LED glows. The attachment what I found in the courtesy OEM disk which is, by the way, labeled for the MSI 6368 Motherboard. :confused:

    I hope it helps you out in some way, shape, or form.
     

    Attached Files:

  8. zenon79

    zenon79 Thread Starter

    Joined:
    Aug 24, 2005
    Messages:
    7
    The board I have is MSI 6511 and man does it suck. I give up. I'm gonna throw this board as far as I can see. Thanks for the help. I'm gonna order a new board for PCChips or An Asus micro atx board
     
  9. Sponsor

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/393361