1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

My monitor is too bright and tinted yellow.

Discussion in 'Windows Vista' started by ProblemMan, Apr 24, 2010.

Thread Status:
Not open for further replies.
Advertisement
  1. ProblemMan

    ProblemMan Thread Starter

    Joined:
    Apr 24, 2010
    Messages:
    1
    I have an HP a665a pc and an HP w1907 monitor, and my os is windows vista (32 bit). When I log in, my display is normal for several seconds, then switches to a brighter and yellow tinted version of what it should. This happens in all programs, and I have no idea how to fix it. I have tried reseting and changing settings on the monitor, tightening and adjusting cables and wires, but the yellow tint remains. I have not been able to find a solution in the control panel either. Any help would be appreciated.
     
  2. etaf

    etaf Wayne Moderator

    Joined:
    Oct 2, 2003
    Messages:
    55,981
    is this connected by a VGA connection - if so have a look at the pins on the plug at both ends of cable , if fitted , and make sure none are bent - a very common problem with VGA plugs - some pins bend and you can still get the plug screwed in - I have seen, red and green tints as a result of this problem ...
    BUT it usually is all the time ... still worth a check as you have tried everything else

    If not a bent pin - i would then start in safe mode and see if the display works ok with just a basic vga driver rather than the full graphics driver - as the PC boots tap f8 - a menu should appear - choose safemode - see if that provides a better display - if so then we know its software of somekind
     
  3. flavallee

    flavallee Frank Trusted Advisor

    Joined:
    May 12, 2002
    Messages:
    63,686
    Can you confirm the model number of your HP computer? I'm coming up blank at the HP/Compaq site with "HP a665a". Also advise what the product/part number on the sticker is.

    ------------------------------------------------------------------

    Here is the support and software site for the HP w1907 19" LCD monitor.

    Display Quality Issues - Screen Is Discolored

    To fix incorrect colors, complete the following steps:

    Check the video cable connections and make sure the connection is not loose. Tighten the connection screws if the connector is loose.

    Press the Auto or Autoselect button on the monitor.

    Press Menu , and select Factory Reset . If the screen is still discolored, continue to the next step.

    If the monitor has more than one type of connection available such as VGA, DVI, or HDMI, try a different type of connection.

    If possible, connect the monitor to another computer. If the colors are incorrect when the monitor is connected to the second computer, the monitor might be damaged or defective.

    Service the monitor.

    ------------------------------------------------------------------
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/918927