1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Need help on Motherboard specs!

Discussion in 'Hardware' started by gloryninja, Aug 3, 2006.

Thread Status:
Not open for further replies.
  1. gloryninja

    gloryninja Thread Starter

    Joined:
    Jul 24, 2005
    Messages:
    227
    hi i bought a new motherboard yesterday but i dont know what kind of spec to put in

    the mohter board is

    ECS K8M800-M2 skt 754 all in 1 MOTHERBOARD

    K8 HT 1600
    Supports Cool'n' Quiet™Technology for a Quieter PC
    DDR 400
    RAID0, RAID1 support
    Serial ATA
    AGP 8X
    6 Channel Audio
    10/100 LAN
    ATA133
    USB 2.0

    Specification
    CPU SUPPORT
    Socket 754 for AMD K8 Athlon 64 processor
    High-performance Hyper Transport CPU interface.
    Support transfer rate of 1600/1200/800/400 mega-transfers per second.
    CHIPSET
    VIA® K8M800& VT8237
    North Bridge: VIA® K8M800
    South Bridge: VIA® VT8237
    MEMORY
    2 x 184-pin DDR DIMM socket support up to 2 GB
    Support DDR400/333/266/200 DDR SDRAM
    EXPANSION SLOT
    1 x AGP 8X/4X slot
    3 x PCI slots
    GRAPHICS
    Integrated S3 UniChrome Pro 2D/3D Graphics
    Share memory : 64MB
    AUDIO
    Realtek ALC655 6-Channel audio CODEC
    Compliant with AC'97 2.3 specification
    LAN
    VIA® VT6103L 10/100 Mbps Fast Ethernet PHY
    REAR PANEL I/O
    1 x PS/2 keyboard & PS/2 mouse connectors
    4 x USB ports
    1 x RJ45 LAN connector
    1 x VGA port
    1 x Parallel port (LPT1)
    1 x Serial port (COM1)
    1 x Audio port (Line-in, Line-out, Mic-in)
    INTERNAL I/O CONNECTORS & HEADERS 1 x 20-pin ATX Power Supply Connector & 4-pin 12V Connector
    1 x FDD connector supports two 360K~2.88MB FDDs
    2 x IDE connectors
    2 x Serial ATA connectors
    2 x USB 2.0 headers support additional 4 USB Ports
    1 x Speaker header
    1 x SPDIF out header
    1 x Front panel switch/LED header
    1 x Front panel audio header
    CD in/ AUX in headers
    CPUFAN/CASFAN connectors
    STORAGE
    Support by VIA® VT8237
    -- 4 x Ultra DMA133/100/66 devices
    -- 2 x Serial ATA devices
    RAID0 & RAID1 configuration
    SYSTEM BIOS Award BIOS with 4Mb Flash ROM
    Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
    Supports ACPI revision 1.0 specification
    FORM FACTOR
    Micro-ATX Size, 244mm*200mm

    what can i put in what kind of ram n processer?


    --------------------------------------------------------------------------------
     
  2. Jones

    Jones

    Joined:
    Jul 28, 2005
    Messages:
    2,291
    Well, here's what processor you can put in:
    CPU SUPPORT
    Socket 754 for AMD K8 Athlon 64 processor

    And your RAM:
    MEMORY
    2 x 184-pin DDR DIMM socket support up to 2 GB
    Support DDR400/333/266/200 DDR SDRAM

    Do some searches on places like newegg.com for components that match these specs, and you should be good to go.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/489066

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice