Need to loop the second router to the main router

Ankith

Thread Starter
Joined
Sep 20, 2020
Messages
1
Hello,

I need to loop the second router to the main router.

could you guys support?
 

zx10guy

Trusted Advisor
Spam Fighter
Joined
Mar 30, 2008
Messages
6,506
More details will go a long way towards getting an appropriate answer.
 

Couriant

James
Trusted Advisor
Spam Fighter
Joined
Mar 26, 2002
Messages
37,243
If you mean add another router to your main one, here is some information from a retired member:

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc. Note that you should use the same SSID and encryption key for the secondary router but a non-conflicting channel. I recommend channels 1, 6, or 11 for use for the best results.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!

This procedure bypasses the routing function (NAT layer) and configures the router as a switch (or wireless access point for wireless routers).

For reference, here's a link to a Typical example config using a Netgear router
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top