1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Network keeps dropping on TV, laptop, printer

Discussion in 'Networking' started by Deeyana, Dec 23, 2012.

Thread Status:
Not open for further replies.
  1. Deeyana

    Deeyana Thread Starter

    Joined:
    Dec 23, 2012
    Messages:
    1
    If this problem has been answered already then I apologize for anyone repeating the answer.
    First of all I am not tech savvy at all. I purchased a new ASUS dual band wireless router and a Bravia smart TV about a couple weeks ago. For some reason every now and then the TV, laptop and printer say that there is not network connection. Several times I have turned of the router and modem and turned them back on and this has corrected the problem. I've had to reconnect the printer twice using the wep key. I am not sure what is going on or where the problem lye's but I just feel I've restarted the modem and router, and pulled out the wep key way too many times. Is there any suggestions to what is going on? Also, I'm not sure if this will matter but I live in a duplex and two of my neighbors bought a smart TV at the same time(black Friday). Maybe we are overpowering each other, I don't know.
     
  2. etaf

    etaf Moderator

    Joined:
    Oct 2, 2003
    Messages:
    65,413
    First Name:
    Wayne
    is this ASUS dual band wireless router shared between the neighbours as well ?

    on the laptop can we have some details as follows

    would you post the following tests when the internet is working OK, and then repeat ALL the tests when the internet disconnects.
    Make sure you also indicate on the reply which tests are for what condition.

    please include the xirrus screen shots for both conditions - see how below.

    make and model of the modem

    Please make a note of the status of the lights on the modem and on the router when working normally - post that light status here.
    Now when the internet disconnects make a note of the status of the lights for the modem and router here again. also note which have changed.

    ------------------------------------------------------------------------
    ipconfig /all
    If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

    We would like to see the results from an ipconfig /all - post back the results in a reply here.

    This should also work for windows 8
    Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
    (A new dialogue box - black with white font, will appear on screen ):

    In the command prompt window that opens, type the following command:

    Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

    ipconfig /all > network.txt & network.txt

    It will export the results into notepad and then automatically open the notepad and display on your screen.

    Now all you need to do is copy and paste those results into a reply here
    to do that:
    From the notepad menu - choose Edit - Select all
    all the text will now be highlighted
    Next
    From the notepad menu - choose Edit - Copy

    Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
    The results from the notepad should now appear in the forum reply.
    ------------------------------------------------------------------------

    ------------------------------------------------------------------------
    Ping Tests
    If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

    Start> Run {search bar in Vista/W7}> type CMD to open a command prompt box
    (A new dialogue box - black with white font, will appear on screen ):

    For Windows 8
    to open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.

    Type the following command
    Ping {then a space and then add the number that is shown against the item labelled "default gateway" shown in the results from the ipconfig /all}
    Post back the results in a reply here
    right click in the command prompt box
    select all
    enter
    control key + C key - to copy
    then reply here and
    control key + V to paste

    Type the following command
    Ping google.com
    Post back the results in a reply here
    right click in the command prompt box
    select all
    enter
    control key + C key - to copy
    then reply here and
    control key + V to paste

    Type the following command
    Ping 209.183.226.152
    Post back the results in a reply here
    right click in the command prompt box
    select all
    enter
    control key + C key - to copy
    then reply here and
    control key + V to paste

    ------------------------------------------------------------------------

    ------------------------------------------------------------------------
    Run Xirrus Wi-Fi Inspector
    Download and install

    If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
    You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

    http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
    Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

    {If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

    Then run and install the program - on a wireless enabled PC/Laptop
    if you get an error - You need will need to have NET Framework installed for the WiFi Inspector to function.
    On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.

    Run the program

    A user guide is available here http://www.xirrus.com/cdn/pdf/Xirrus-Wi-Fi-inspectorguide-1-2-1-RevB-6.aspx

    post a screen shot of the program running.
    if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.

    post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)

    To post a screen shot of the active window.
    1) hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
    OR
    2) if you are using Vista/Windows 7 you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool

    To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
    Full details are available here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

    Note:
    For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better. "A desirable signal level for a robust Wi-Fi connection will be green".
    note: the signal level is a negative number, so for example -88 is worst and -40 is better

    If you are using the Mac OS then use http://www.istumbler.net/

    if you want to optimise base station position and signal strength / dead spots use
    http://www.chimoosoft.com/products/apgrapher/ which has a graph function to monitor signal
    ------------------------------------------------------------------------
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1082122

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice