No Screen Display.

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

allanb2008

Thread Starter
Joined
Jun 10, 2008
Messages
6
Hello,
I have a Acer Veriton 261 and It does not display anything once I power it on. Every thing seems ok inside the PC. Spinning Hard disk, working Fan. Could the onboard VGA be the faulty component?
Regards
 
Joined
Sep 21, 2008
Messages
22
first will be to check all connections – monitor as well as power to the monitor cable.

2nd will be to check the monitor – disconnect the monitor from the back of the cabinet and check if the “signal error” message is displayed. This way you can eliminate an error with the monitor. If you disconnect the monitor and no error is displayed- you can take your monitor to an authorized service vendor.

Next- it may be a RAM Problem. Because your system is turn-on properly & it didnt give display.


Try this Steps......

1. Check the RAM is Plugged on DIMM slot correctly. If it's not correct - plug it correctly

(or)

2. Clean the RAM and the DIMM slot (This case plug out and Plug-in the RAM Carefully)

(or)

3. Replace the RAM
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top