1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Ntfs.sys blue screen

Discussion in 'Windows 7' started by VampRocker, Apr 7, 2011.

Thread Status:
Not open for further replies.
Advertisement
  1. VampRocker

    VampRocker Thread Starter

    Joined:
    Sep 18, 2007
    Messages:
    26
    Alright. Today I was watching some youtube videos when my computer froze. Naturally I restarted it but a blue screen came up. So I restarted again. Screen came up again. So I tried safe mode. Same thing. So I dug out my windows disc, intending to wipe the *******. As soon as I booted from it, it said windows loading files then face me the screen again. It specifically says:
    "A problem has been detected and windows has been shut down to prevent damage to your computer.

    Ntfs.sys

    PAGE_FAULT_IN_NONPAGED_AREA

    If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

    Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

    If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select Advanced Startup Options, and then select Safe Mode.

    Technical information:

    *** STOP: 0x00000050 (0xFFFFF98003980000,0x0000000000000000,0xFFFFF88001c643DB, 0x0000000000000000)

    *** Ntfs.sys - Address FFFFF88001C643DB base at FFFFF88001C59000, DateStamp 4a5bc14f"


    Does anybody know of anything that could help me? I would even settle for being able to successfully boot from disc and wipe my computer.
     
  2. w7pro

    w7pro

    Joined:
    Dec 30, 2010
    Messages:
    255
  3. VampRocker

    VampRocker Thread Starter

    Joined:
    Sep 18, 2007
    Messages:
    26
    I tried all the things on this page. Safe mode, blue screen. System restore, blue screen. Any other ideas?
     
  4. jpdepucci

    jpdepucci

    Joined:
    Apr 5, 2011
    Messages:
    33
    Considering you cannot get your system to an operational state in either safe mode or normal mode, I would pull the drive and run a virus scan on it.

    You can purchase a USB cable kit that supports both sata and pata - Hook that drive up, plug in to another system with a reputable anti-virus and run a virus scan. Or hook it up as a slave drive on another system if possible and run a virus scan.

    It's either that or a bad hard drive. You can rule the hard drive out by booting up, formatting the disk and performaing a clean install. If it works - great- if not- you know what the problem is.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/990296

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice