1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Opening a Compaq Presario C500

Discussion in 'Hardware' started by eyesotd, Aug 12, 2009.

Thread Status:
Not open for further replies.
Advertisement
  1. eyesotd

    eyesotd Thread Starter

    Joined:
    Aug 12, 2009
    Messages:
    7
    Hello,

    This is a completely hardware related issue. I have had my Compaq Presario C500 laptop for a couple of years now, and I've noticed that it's getting pretty dusty. A computer store wanted to charge me $60 for just removing dust from the laptop, so I decided to do it myself. The problem is that for some reason I just can't open the casing of my laptop. I'm pretty computer literate, but I'm a bit unfamiliar with hardware. Here is a picture of the laptop that I will try to use to describe my problem.


    [​IMG]

    I unplugged the laptop and removed the battery, of course. I then removed all the srews that I could see from the back casing [which you can't see from the picture]. While I could slightly open the sides of the casing, It wouldn't come off. After searching online, I read about a different laptop that had screws underneath a panel that is just above the keyboard and is below the screen hinges on the front side of the laptop. This seemed to be the case with my laptop as well, so I took off the panel [it's where you can see the power, wifi, and sound buttons] and I removed those screws as well.

    The back casing opened up a bit more, since those screws were apparently attached to the back case, but still only slightly. I can't actually get to the fan. There seems to be at least something else at the bottom of the photograph, below the touchpad, where the laptop closes, and where the speakers are that is holding the casing together.

    I've managed to only scratch a couple of things and not break anything so far, because I've put this back together and tried again several times, but I think I'm really stuck this time. I don't want to break anything. lol. Please help!

    Thanks a lot,


    Dave
     
  2. Triple6

    Triple6 Rob Moderator

    Joined:
    Dec 26, 2002
    Messages:
    45,574
    You really don't need to open it at all. Just buy a can of compressed air or use a compressor to blow out the fans and vents. If its dust, then taking the laptop is silly and unnecessary.
     
  3. eyesotd

    eyesotd Thread Starter

    Joined:
    Aug 12, 2009
    Messages:
    7
    Yes I have a can of compressed air. I guess I forgot to mention that. I have cleaned the grids that cover the air intake and outtake, and I have also blown the air into the fan through the grid, but the laptop still overheats. So, I think there is probably dust clumped or stuck in there. I think I do need to open it up. Thanks for the help.
     
  4. Triple6

    Triple6 Rob Moderator

    Joined:
    Dec 26, 2002
    Messages:
    45,574
    Ok, generally you have to remove every screw from the bottom of the laptop and any at he back of it as well. All drives and panels need to come of the bottom to reveal any hidden screws then the keyboard needs to come off as well and probably the piece between the keyboard and LCD panel needs to be popped off if its a separate piece as well.
     
  5. eyesotd

    eyesotd Thread Starter

    Joined:
    Aug 12, 2009
    Messages:
    7
    Yep, I have done that. I have removed the any panels that were there at the back and removed more screws hidden underneath, and I have also taken off the keyboard and the piece between it and the LCD panel, and taken those screws off underneath that panel as well. Is there anywhere else that I need to "pop off" per se?
     
  6. Triple6

    Triple6 Rob Moderator

    Joined:
    Dec 26, 2002
    Messages:
    45,574
    If you start to open up the laptop you should feel where there is still something holding it.
     
  7. eyesotd

    eyesotd Thread Starter

    Joined:
    Aug 12, 2009
    Messages:
    7
    Yes, I feel like there is still something towards the front of the laptop, like i mentioned in my first post. I think there is at least something else below the touch pad if you look at the picture, where the laptop closes, and where the speakers are located. But I don't see anywhere I can wedge a screwdriver into, and I'm hoping to not break my speakers. haha.
     
  8. Triple6

    Triple6 Rob Moderator

    Joined:
    Dec 26, 2002
    Messages:
    45,574
  9. eyesotd

    eyesotd Thread Starter

    Joined:
    Aug 12, 2009
    Messages:
    7
    hmm... i think it's similar. I'll try following those instructions, and then I'll post an update. thanks.
     
  10. eyesotd

    eyesotd Thread Starter

    Joined:
    Aug 12, 2009
    Messages:
    7
    Sorry about the absence, I've been busy the last couple of weeks. I read through the PDF file in detail, and I think that that is my laptop pictured there, even though the model number is different. But according to that manual, I have to remove like 6 things before even being able to open up the back casing, including the screen, keyboard, and CD drive.

    Wow, it amazes me how stupidly the hardware of this laptop was designed. All that just to get to the fan? Is that normal?
     
  11. Triple6

    Triple6 Rob Moderator

    Joined:
    Dec 26, 2002
    Messages:
    45,574
    Yes, most laptops require very significant disassembly to get at many parts that you would think would be easily accessible.
     
  12. eyesotd

    eyesotd Thread Starter

    Joined:
    Aug 12, 2009
    Messages:
    7
    arg. youtube sure made it look easy. alright, well, thanks a ton for helping me out. i'll keep the instruction manual for future reference; it may come in handy sometime.

    thanks again!
     
  13. Sponsor

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/851798