1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Pc hangs out while booting

Discussion in 'Windows XP' started by vsvaibhavsingh1, Apr 13, 2010.

Thread Status:
Not open for further replies.
  1. vsvaibhavsingh1

    vsvaibhavsingh1 Thread Starter

    Joined:
    Apr 13, 2010
    Messages:
    2
    Hello,

    I have got a problem on my PC. I got a clean blue screen after a few blink of cursors.

    then, I loaded the PC up in Safe Mode. I got the same response again and I had to turn the PC off by holding down the power button (not good I know). Tried to load it up in Safe Mode again and it comes up with this on the screen :

    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\ntoskrnl.exe
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\hal.dll
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\KDCOM.DLL
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\BOOTVID.dll
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\config\system
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\c_1252.nls
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\c_850.nls
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\l_intl.nls
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\FONTS\vgaoem.fon
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\AppPatch\drvmain.sdb
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\DRIVERS\ACPI.sys
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\DRIVERS\WMILIB.SYS
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\DRIVERS\pci.sys
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS\system32\DRIVERS\isapnp.sys

    That is all it loads and won't go any further.

    Any help would be greatly appreciated and sorry if I have posted this in the wrong section.
     
  2. Saga Lout

    Saga Lout

    Joined:
    Sep 15, 2004
    Messages:
    3,791

    Hello and welcome to TSG. Right section, by the way.

    Restart and tap Function 8 until the Advanced Boot menu comes up. That includes "Disable automatic restart on system failure" so highlight that one and post back some of the detail form the Stop Error message on the blue screen. What we need is the numeric code 0x0000?? and any WORDS_IN_CAPS_JOINED_UP by underscores.

     
  3. vsvaibhavsingh1

    vsvaibhavsingh1 Thread Starter

    Joined:
    Apr 13, 2010
    Messages:
    2
    Thanks for the quick response first of all.
    Actually I have already tried all the options available in the advanced boot options. Almost all options, except SAFE MODE and SAFE MODE WITH COMMAND PROMPT, leads to a blank screen. No error code is available.It seems as kind of hardware problem but i am not sure.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/916596

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice