Problem When Copying A DVD With Nero

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

TurnerUKTA

Thread Starter
Joined
Jan 22, 2005
Messages
125
Hello, ive had no problems so far with regards to copying dvds, but yesterday i decrypted a dvd with DVD Shrink and then went it went to burn it using DVD Shrink i got an error saying it could not copy but all my decrypted files were at a certain location.

I thought this could have been a faulty blank dvd, but ive just gotten the same error again so i tried to burn using nero. I got the following Error, i dunno if anybody can make anything out of the error.

I hope somebody can help, thanks.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.0.2
Recorder: <AOPEN DUW1608/ARR> Version: A060 - HA 1 TA 1 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1613 >Version: 9YS2 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 1 DMA: On
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1613 E: CDRom0
AOPEN DUW1608/ARR F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 621MB (636780kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.2.2005
UDF/ISO compilation
19:28:01 #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

19:28:01 #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

19:28:01 #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:28:01 #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

19:28:01 #5 Text 0 File Reader.cpp, Line 118
Reader running

19:28:01 #6 Text 0 File Writer.cpp, Line 124
Writer AOPEN DUW1608/ARR running

19:28:01 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

19:28:01 #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

19:28:01 #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

19:28:26 #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2286121 (508:01.46, 4465MB)

19:28:26 #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

19:28:26 #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: AOPEN DUW1608/ARR, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

19:28:26 #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Dual Layer.)

19:28:26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286122 (2286122) = #2286122/508:1.47
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286122 blocks [AOPEN DUW1608/ARR ]
--------------------------------------------------------------

19:28:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [AOPEN DUW1608/ARR ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681977856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286122 | lead-out | 1 | 0x00 | 0x41

19:28:26 #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

19:28:26 #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

19:28:26 #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

19:28:26 #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 8x (11,040 KB/s)

19:28:26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:28:26 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:10,277 (850277ms) -> OK

19:28:26 #22 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

19:28:26 #23 Text 0 File Mmc.cpp, Line 19451
Set BUFE: JustLink -> ON , JustSpeed : ON

19:28:26 #24 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

19:28:26 #25 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:36:34 #26 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x16 0xBD 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x16 0xBB 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

19:36:34 #27 CDR -1135 File Writer.cpp, Line 301
Write error

19:36:34 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:36:34 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

19:36:34 #30 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 1490175

19:36:42 #31 SCSI -1135 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x16 0xBB 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

19:36:42 #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

19:36:42 #33 CDR -1135 File WriterStatus.cpp, Line 164
Write error

19:36:42 #34 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

19:36:42 #35 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

19:36:42 #36 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 8x (11,040 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 11:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Members online

Top