Problems with Ghost Recon and The Sum Of All Fears

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

ZX81

Thread Starter
Joined
Jun 12, 2005
Messages
10
With ghost recon i get an error message with this data in the error signature.

Appname: ghostrecon.exe AppVer:0.0.0.0 ModName: ghostrecon.exe
ModVer: 0.0.0.0 offset: 005282F

And with The Sum Of All Fears I get like its going to load then the window just closes.

Specs

Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: English (Regional Setting: English)
System Manufacturer: HP Pavilion 04
System Model: P7515A-ABA 531w
BIOS: Version 3.07
Processor: Intel(R) Celeron(TM) CPU 1300MHz
Memory: 254MB RAM
Page File: 266MB used, 358MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: None
DxDiag Version: 5.03.2600.2180 32bit Unicode

--------------
Display Devices
---------------
Card name: Intel(R) 82810E Graphics Controller
Manufacturer: Intel Corporation
Chip type: Intel(R) 82810
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_7125&SUBSYS_7148109F&REV_03
Display Memory: 32.0 MB
Current Mode: 800 x 600 (24 bit) (60Hz)
Monitor: hp pavilion mx70
Monitor Max Res: 1280,1024
Driver Name: i81xdnt5.dll
Driver Version: 6.13.0001.3196 (English)
DDI Version: 8
Driver Attributes: Final Retail
Driver Date/Size: 7/23/2002 09:01:38, 702845 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: i81xnt5.sys
Mini VDD Date: 7/23/2002 09:01:38, 161020 bytes
Device Identifier: {D7B78E66-3265-11CF-537F-4951A1C2CB35}
Vendor ID: 0x8086
Device ID: 0x7125
SubSys ID: 0x7148109F
Revision ID: 0x0003
Revision ID: 0x0003
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

-------------
Sound Devices
-------------
Description: SoundMAX Digital Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_8086&DEV_2415&SUBSYS_7148109F&REV_02
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.3035 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 9/24/2001 10:27:18, 463848 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xB5B
Min/Max Sample Rate: 8000, 48000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Top